S-Band Transmit Upconverter
Source: Orban Microwave Inc.
This unit converts an industry standard 70, 140, or 160 MHz IF signal to S-Band. One or more RF filters (SAW or ceramic type depending on the requirements) reject the unwanted image and local oscillator signals. This front end is part of a MIMO system and is 802-11g compliant. While this converter operates at S-Band, similar systems have been developed for L, C, X, and Ku-Band
Click Here To Download:
Datasheet: S-Band Transmit Upconverter
This unit converts an industry standard 70, 140, or 160 MHz IF signal to S-Band. One or more RF filters (SAW or ceramic type depending on the requirements) reject the unwanted image and local oscillator signals. This front end is part of a MIMO system and is 802-11g compliant. While this converter operates at S-Band, similar systems have been developed for L, C, X, and Ku-Band.
Datasheet: S-Band Transmit Upconverter
Datasheet: S-Band Transmit Upconverter
This unit converts an industry standard 70, 140, or 160 MHz IF signal to S-Band. One or more RF filters (SAW or ceramic type depending on the requirements) reject the unwanted image and local oscillator signals. This front end is part of a MIMO system and is 802-11g compliant. While this converter operates at S-Band, similar systems have been developed for L, C, X, and Ku-Band.
Features
- Receive converters available
- Full duplex converters available
- Available for L, S, C, X, Ku-Band
- Wide range of IF input frequencies and bandwidths
- Internal or external power supplies
- TCXO or OCXO on board frequency reference
- Internal frequency reference output available
- Local oscillator can be locked to external frequency reference
- Stand alone units or integrated in a 19" IF subsystem
Click Here To Download:
Datasheet: S-Band Transmit Upconverter
This website uses cookies to ensure you get the best experience on our website. Learn more