News | June 8, 2023

Rogers Corporation To Present And Exhibit At IMS in San Diego, CA

Source: Rogers Corp.

Chandler, Arizona, June 8th, 2023 – Rogers Corporation (NYSE:ROG) announced Technical Marketing Manager, John Coonrod, will give 2 presentations June 14th in the MicroApps Theater at the International Microwave Symposium (IMS) in San Diego, CA. Topics include “3D Printed RF Structures Open the Potential to Think Out of the Box and Thermal Stability Consistency is Even More Important at Millimeter-Wave Frequencies.

In addition, Rogers will be showcasing its products in Booth #1635 during IMS, the world’s largest RF and Microwave show, which takes place from Tues., June 13th - Thurs., June 15th. These products include Radix™ 3D Printable Dielectrics and new Anteo™ low loss laminates.

Rogers new family of Anteo laminates is designed to offer low loss RF performance as an alternative to FR-4 in commercial and consumer applications. With a dielectric constant of 4.07 +/- 0.08 and a dissipation factor of .005 at 10 GHz, Anteo laminates offer two benefits in comparison to thicker grades of FR-4. For a comparable price, it offers superior performance and enables greater antenna gain and efficiency. But the lower dissipation factor also enables similar or marginally improved performance at 1/3rd to ½ the thickness of FR-4, thus providing a significant cost savings and improvement in packaging.

Radix 3D Printable Dielectric, is the first 3D material featuring a dielectric constant of 2.8 and low loss characteristics at microwave frequencies. These printable dielectric materials give radio frequency (RF) designers unprecedented design freedom in creating new components, eliminating the need to consider typical manufacturing design constraints.

Rogers Corporation’s Radix 3D Printable Dielectric is a proprietary composite material designed for Digital Light Processing (DLP) 3D printing, enabling a scalable, high-resolution printing process for end-use RF dielectric component manufacturing. This printable dielectric material has a targeted dielectric constant of 2.8 and a dissipation factor of 0.0043 at 10 GHz when cured.

The material is intended for use as RF material in applications where new geometric freedom can enhance the figure of merits of an RF system, such as gradient dielectric constant (GRIN) structures and other complex three-dimensional parts. The Radix 3D Printable Dielectric offers the industry a way to manufacture systems and components at scale that could not be made with traditional fabrication methods. Radix materials are available directly from Rogers Corporation and our 3D printing partners. Learn more about Radix 3D Printable Dielectrics: View Video

About Rogers Corporation
Rogers Corporation (NYSE:ROG) is a global leader in engineered materials to power, protect and connect our world. Rogers delivers innovative solutions to help our customers solve their toughest material challenges. Rogers’ advanced electronic and elastomeric materials are used in applications for EV/HEV, automotive safety and radar systems, mobile devices, renewable energy, wireless infrastructure, energy-efficient motor drives, industrial equipment and more. Headquartered in Chandler, Arizona, Rogers operates manufacturing facilities in the United States, Asia and Europe, with sales offices worldwide. For more information, visit rogerscorp.com