RFID (radio frequency identification) technology has significant potential in biomedical applications within the healthcare industry. It can be employed to improve patient care, enhance medical research, and streamline various biomedical processes.
Elegant solutions with strong digital isolation, high power conversion efficiency, and minimal EMI emissions are now accessible, simplifying development for digital designers.
This article discusses the differences in proprietary and generic interfaces, the benefits each type has to offer, and provides some solutions to potential interface barriers and how to remove them.
You can optimize design choices to preserve RF signal quality near digital components, while also preventing interference among multiple analog signals.
In this article, we'll discuss the importance of electromagnetic simulation in optimizing communication antenna systems for compliance and tight product design cycles.
There are three essential performance parameters when choosing a signal generator to evaluate a radar system: phase noise, frequency switching speed, and cost.
It is a universal experience of modern life: You’re in an area of sufficient cellular signal, but the internet connection is degraded. A Bluetooth link is dropped even though the device battery is fully charged. The touchscreen of a device is unresponsive for no apparent reason.
Using Altair simulation tools, we pushed a basketball hoop model to its limits to see how much force a backboard can withstand before it breaks (keeping in mind current design regulations).
Join XFdtd's product team for a discussion about group delay for UWB antennas. Remcom's application engineering team developed a method for analyzing group delay for a single-port antenna and is looking for market feedback.
The AR RF/Microwave Instrumentation emcware 6.0 is an all-inclusive EMC test software designed for radiated susceptibility, conducted immunity, radiated emissions, and conducted emissions. It offers automated EMC testing and report generation for all EMC test labs.
R&S AdVISE automates visual inspection for equipment under test (EUT) during testing, eliminating human inattention, ensuring reproducible results, and simplifying test documentation. It's commonly used for EMS testing with R&S EMC32 and R&S ELEKTRA software.
The 5560 is a high-performance, SOSA-aligned 3U OpenVPX coprocessor board. It serves as an ideal stand-alone processor or as a co-processor for distributed ACAP processing tasks.
The QPD1425L is a 375 W discrete GaN on SiC HEMT that operates from 1.2 to 1.4 GHz providing typically 56.3 dBm of saturated output power with 17 dB of large-signal gain and 75% of drain efficiency.