Product/Service

RF Distribution Multicouplers

Source: Cobham
The Model 409 VLF-HF Multicoupler is a compact broadband unit which permits up to 16 receivers (409-02) or eight receivers (409-03) to be coupled to a single antenna. A low noise input amplifier provides a nominal gain of 5 dB and achieves a wide dynamic range over a broad band covering the VLF and HF bands. Input circuitry provides protection under high ambient RF field conditions or from nearby lightning strikes.

409 VLF/HF 1 kHz-60 MHz

The Model 409 VLF-HF Multicoupler is a compact broadband unit which permits up to 16 receivers (409-02) or eight receivers (409-03) to be coupled to a single antenna. A low noise input amplifier provides a nominal gain of 5 dB and achieves a wide dynamic range over a broad band covering the VLF and HF bands. Input circuitry provides protection under high ambient RF field conditions or from nearby lightning strikes.

Click Here To Download:
Datasheet: 409 VLF/HF 1 kHz-60 MHz


410 HF 100 kHz-32 MHz

The Model 410 HF Multicoupler is a compact unit which allows coupling of up to sixteen HF Receivers to a single antenna or to one of two switch selectable antennas. A low noise input amplifier provides a nominal gain of 5 dB and achieves a wide dynamic range over the entire HF band.

Click Here To Download:
Datasheet: 410 HF 100 kHz-32 MHz


410VXI HF 100 kHz-32 MHz

The Model 410VXI HF Multicoupler is a compact unit which allows RF energy from a single antenna to be distributed to up to eight HF Receivers. A low noise input amplifier provides a nominal gain of 5 dB and achieves a wide dynamic range over the entire HF band. Input circuitry provides protection under high ambient RF field conditions or from nearby lightning strikes.

Click Here To Download:
Datasheet: 410VXI HF 100 kHz-32 MHz


414 VHF/UHF 20-1200 MHz

The Model 414 VHF/UHF Multicoupler is a compact unit which allows up to 14 VHF/UHF receivers to be coupled to a single antenna or to one of two switch selectable antennas. The input signal drives a wideband amplifier which achieves wide dynamic range and high isolation with amplifier gain sufficient to overcome incidental losses.

Click Here To Download:
Datasheet: 414 VHF/UHF 20-1200 MHz


418 VHF/UHF 20-3000 MHz

The Model 418 VHF/UHF (20 to 3000 MHz) Multicoupler is our latest broadband, high performance unit designed for compatibility with wide frequency range receiving systems requiring up to eight outputs from a single antenna input.

Click Here To Download:
Datasheet: 418 VHF/UHF 20-3000 MHz


418VXI VHF/UHF 20-3000 MHz

The Model 418VXI VHF/UHF (20 to 3000 MHz) Multicoupler is our latest broadband, high performance unit designed for compatibility with wide frequency range signal collection and signal analysis systems requiring up to eight outputs from a single antenna input.

Click Here To Download:
Datasheet: 418VXI VHF/UHF 20-3000 MHz



510 Microwave Multicoupler 0.5-18 GHz

The Model 510 Microwave (0.5 to 18 GHz) Multicoupler series is our latest broadband, high performance unit designed for compatibility with wide frequency range receiving systems requiring up to eight outputs from a single antenna input.

Click Here To Download:
Datasheet: 510 Microwave Multicoupler 0.5-18 GHz


MODEL 417VXI Wideband Multicoupler 30 MHz TO 6000 MHz

The Model 417VXI covers the 30 to 6000 MHz frequency range. The use of a wideband, high dynamic range amplifier results in minimum distortion over the specified frequency range and gain sufficient enough to overcome incidental losses. The Model 417VXI is available with eight outputs in a VXI chassis permitting convenient side-by-side installation.

This multicoupler is also available in a 1U, half-rack configuration and has the same specifications as the 417VXI with the excepetion of input power. The half-rack configuration is powered from the ac mains.

Click Here To Download:
Datasheet: MODEL 417VXI Wideband Multicoupler 30 MHz TO 6000 MHz