Product/Service

Prescaler: 1.1 GHz Dual Modulus ÷64/65, ÷128/129 ML12052-5P

Source: Lansdale Semiconductor, Inc.
The ML12052 is a super low power dual modulus prescaler used in phase–locked loop applications with low power dissipation of 2.7 mW at a minimum supply voltage of 2.7 V.

Click Here To Download:
Datasheet: Prescaler: 1.1 GHz Dual Modulus ÷64/65, ÷128/129 ML12052-5P

The ML12052 is a super low power dual modulus prescaler used in phase–locked loop applications with low power dissipation of 2.7 mW at a minimum supply voltage of 2.7 V.

The ML12052 can be used with CMOS synthesizers requiring positive edges to trigger internal counters such as Motorola's MC145xxx or Lansdale's ML145xxx series in a PLL to provide tuning signals up to 1.1 GHz in programmable frequency steps.

A Divide Ratio Control (SW) permits selection of a 64/65 or 128/129 divide ratio as desired.

The Modulus Control (MC) selects the proper divide number after SW has been biased to select the desired divide ratio.

  • 1.1 GHz Toggle Frequency
  • The ML12052 is Pin and Functionally Compatible with the Motorola or ON Semiconductor MC12022
  • Low Power 1.0 mA Typical
  • 2.0 mA Maximum, VCC = 2.7 to 5.5 Vdc
  • Short Setup Time (tset) 16 ns Maximum @ 1.1 GHz
  • Modulus Control Input Level is Compatible with Standard CMOS and TTL
  • Maximum Input Voltage Should Be Limited to 6.5 Vdc
  • Operating Temperature Range TA = –40 to 85°C

Click Here To Download:
Datasheet: Prescaler: 1.1 GHz Dual Modulus ÷64/65, ÷128/129 ML12052-5P