Product/Service

Power Heads

Source: AR

pm2002

The PH2000 Series of Power Heads is designed for use with the Model PM2002 Power Meter. The most critical element of any power meter is the power head. The head is responsible for converting the incident RF or microwave power to an equivalent voltage which can be processed by the power meter. The head must also present to the incident power an impedance which is closely matched to the transmission system to avoid mismatch errors.

Request Information

The PH2000 Series of Power Heads is designed for use with the Model PM2002 Power Meter. The most critical element of any power meter is the power head. The head is responsible for converting the incident RF or microwave power to an equivalent voltage which can be processed by the power meter. The head must also present to the incident power an impedance which is closely matched to the transmission system to avoid mismatch errors. Finally, the head must introduce the smallest drift and noise possible so as not to disturb the measurement. Full specifications can be found on the data sheet.

AR offers a family of diode or thermocouple, 50 or 75 ohm power heads with excellent specifications. All are supplied with carefully measured calibration factors that are NIST-traceable. Each Power Head is supplied with a data adapter and a 5 foot Power Head Cable.

Dual Diode Heads Available:

  • PH2000: 10 kHz to 8GHz, -60 to +20 dBm
  • PH2001: 100 kHz to 12.4 GHz, -60 to +20 dBm
  • PH2002: 100 kHz to 1 GHz, -60 to +20 dBm
  • PH2004: 100 kHz to 18 GHz, -60 to +20 dBm
  • PH2005: 500 kHz to 18 GHz, -70 to +20 dBm
  • PH2006: 500 kHz to 18 GHz, -60 to +30 dBm
  • PH2007: 100 kHz to 18 GHz, -50 to +30dBm
  • PH2008: 100 kHz to 18 GHz, -40 to +33 dBm
  • PH2009: 10 MHz to 26.5 GHz, -70 to +20 dBm
  • PH2010: 30 MHz to 40 GHz, -70 to +20 dBm
  • PH2011: 100 kHz to 18 GHz, -20 to +37 dBm

    Thermocouple Heads Available:

  • PH2030: 10 MHz to 18 GHz, -20 to +20 dBm
  • PH2031: 100 kHz to 4.2 GHz, -20 to +20 dBm
  • PH2032: 30 MHz to 26.5 GHz, -20 to +20 dBm
  • PH2033: 10 MHz to 18 GHz, 0 to +37 dBm
  • PH2034: 100 kHz to 4.2 GHz, 0 to +37 dBm
  • PH2035: 10 MHz to 18 GHz, 0 to +44 dBm
  • PH2036: 100 kHz to 4.2 GHz, 0 to +44 dBm

Need More Information? Just Ask.

Click the button below to directly contact the supplier. Use it to:

  • Ask a question.
  • Request more detailed information or literature.
  • Discuss your current project/application.
  • Request a quote.
  • Locate a distributor in your area.
  • Schedule a demo.
Request Information