Product/Service

L-Band Teleport Duplex Systems With Receiver And Transmitter Racks

Source: Dow-Key Microwave Corp.
Dow-Key offers fully loaded receiver (Rx) and transmitter (Tx) racks for Satcom Teleport applications transmitting over L-band frequency. The systems are controlled via master-slave controller and each rack is equipped with (4) 12x12 solid state switching systems cascaded to12x48 (Rx Rack) respective 48x12 (Tx rack) configurations, a Power Supply unit, a Signal Monitor panel, a Signal Attenuation Control module, and two FOXCOM Fiber Optic modules. In addition, the Rx rack is populated with (6) MITEQ L-band amplifiers.

Click Here To Download:
Datasheet: L-Band Teleport Duplex Systems With Receiver And Transmitter Racks

Dow-Key Microwave's 5190/5191 model is composed of two Full Duplex Transmitter (Tx) and Receiver (Rx) racks; operating from 900 to 2050 MHz. This L-band Teleport is unique such that the system has a single main controller module Model 5162-4 (located on the Rx rack), while the Tx rack is controlled via a slave module Model 5162-3. Thus, when closing a path on the receiver side, a matching path will also be closed on the transmitter end.

This sophisticated switching system is built by cascading (4) 12x12 Fan-Out (Model 5162-2) and (4) 12x12 Fan-In (Model 5162-1) modules to create 12x48 configuration on the Rx rack respective 48x12 configuration on the Tx rack. On the Rx rack, all (4) 12x12 modules are routed to a Main Control Module and integrated to a 12x48 system, while on the Tx rack it goes to the Slave Control Module.

The system is fully controlled through Main Controller Module (from Rx rack), which is equipped with Windows 2000 Professional operating system (CPU), graphical LCD touch screen display and a removable hard disk. On the rear panel, 12x12 Modules Fan-out modules are interconnected using 9-pin CANbus D-connector.

Model 5190/5191 is also loaded with (4) FOXCOM Fiber Optic modules; two for transmitting and two for receiving signals. In addition, each rack is equipped with a Power Supply module, a Signal Monitor panel, and a Signal Attenuation Control module. Furthermore, the Rx rack is populated with (6) MITEQ L-band amplifiers.

Click Here To Download:
Datasheet: L-Band Teleport Duplex Systems With Receiver And Transmitter Racks