5G is a broad category of innovative technologies that will transform wireless communications. Knowles offers an array of 5G solutions for mobile, broadband and wireless communications applications.
5G is a broad category of innovative technologies that will transform wireless communications.
For Mobile Users:
Enhanced Mobile Broadband (eMBB)
eMBB will enable increased mobile capabilities, with three distinct attributes:
For Fixed Broadband Users:
Fixed Wireless Access.
Distinct from the advantages 5G brings to mobile, Fixed Wireless Access (FWA) is a way to provide high performance broadband access to homes and offices through wireless. This aspect of 5G leverages millimeter wave (mmWave) frequencies.
For connected devices, equipment and infrastructure components:
Internet of Things.
The increased capacity and reduced latency that 5G brings will further fuel the growth of IoT (Internet of Things) applications.
As innovation in 5G encompasses a wide range of technologies and use cases we see a range of frequencies being deployed depending on the use case.
From 1GHz to 6GHz we encounter the familiar LTE bands. This region is being looked at for use cases that need of the order of 100MHz of bandwidth, with the 2.5GHz Band 41 and 3.5GHz (42+43) regarded as candidates for 5G enhanced Mobile Broadband (eMBB) applications
Frequencies below 1GHz in the UHF perform well in applications that require long range and high data rates – these are the frequencies we are used to seeing in Macro base station applications. Moving forward to 5G they will be leveraged for lower data rate and narrow band applications (such as already used in 4G IoT applications) and are looked at for the ‘massive Machine to Machine Type Communications’ (mMTC).
Starting at 28GHz we find the cm-wave and mmWave frequencies that are being utilized in Fixed Wireless Access (FWA) applications. It is these frequencies that are being deployed first.
You can learn more about the 5G Frequency Spectrum and some of the aspects of mmWave in our Blog Post An Introduction to the 5G Frequency Spectrum
The millimeter-wave part of the electromagnetic spectrum is at the high end of the microwave region (which spans ~300 MHz to 300 GHz) and is usually taken to mean frequencies from ~30 GHz to 300 GHz and wavelengths in the range of 1mm to 1cm. The ITU designation for the band spanning 30 GHz to 300 GHz is EHF (Extremely High Frequency).
One of the characteristics that makes this part of the spectrum so interesting to communication applications is that the frequencies are that much higher than those historically used in wireless so the available spectrum in the mmWave potentially opens up 200x the spectrum available below 3 GHz.
From a dramatic increase in available bandwidth comes an increase in achievable data-rates, making these frequencies extremely interesting to teams around the world working on 5G communications. However, with this increase in frequency comes a set of challenges.
One of the challenges that engineers now face is how to sufficiently implement high-performance RF filtering in mmWave applications.
To get up to speed on some of the terminology used to discuss filter technology, take a look at our Blog Post:Filter Terminology and Specifications
For a perspective on how the performance of filters can impact a 5G system review our Blog Post Spectral Efficiency and mmWave Bandpass Filter Temperature Stability.
Our Blog Post on Microstrip Filter Sizes discusses how our filter technology fits into the wider landscape of available filter implementations.
For a more in depth introduction to mmWave download RF Filtering For 5G Millimeter Wave Applications. It discusses some of the areas of 5G communications that will be implemented in the millimeter wave (mmWave) region of the RF spectrum and provides a guide to available RF filtering options at these frequencies.
Implementing High Performance Filters In Millimeter Wave Applications further reviews some of the considerations to make when selecting a filter technology for mmWave applications.
Reduce Cost and Complexity in 5G mmWave systems with Surface Mount Solderable Filter Components takes a close look at the architecture of 5G mmWave systems and the advantages of surface mount in building these systems.
To get some insight into how microstrip filter technology can be applied to mmWave filtering applications start with the article Microstrip Filter Topologies
Knowles Precision Devices (DLI) Filter Technology is a proven approach to addressing the challenge of implementing high performance filters at mmWave frequencies for 5G applications.