Heavy-Duty, Non-Conductive Antenna Support and Positioner
The Model AP5010B Antenna positioner,a heavy-duty non-conductive support and positioner for the AR RF/Microwave Instrumentation AT5026A or AT2526A high-gain log-periodic antennas.Built on casters, with leveling feet,for easy movement in a shielded room or open site testing, the AP5010B allows the test engineer to position the antenna for either vertical or horizontal polarization as well as permitting the antenna to be tilted 30 degrees.
Click Here To Download:
•Datasheet: AP5010B - Heavy-Duty, Non-Conductive Antenna Support and Positioner
The Model AP5010B Antenna positioner, is a heavy-duty non-conductive support and positioner for the AR RF/Microwave Instrumentation AT5026A or AT2526A high-gain log-periodic antennas. Built on casters, with leveling feet,for easy movement in a shielded room or open site testing, the AP5010B allows the test engineer to position the antenna for either vertical or horizontal polarization as well as permitting the antenna to be tilted 30 degrees. The height adjustment is from 1.93 meters to 3.16 meters, measured from the floor to the centerline of antenna. The base leg adjustment is from 1.53 meters overall to 2.04 meters. The primary structure of the AP5010B is constructed of Fiberglas, PVC, Delrin, and Nylatron and the weight of the unit without an antenna is approximately 45 kg (98 lbs).
Click Here To Download:
•Datasheet: AP5010B - Heavy-Duty, Non-Conductive Antenna Support and Positioner