Product/Service

Dual Stage Low Noise Amplifier (LNA): MML09212H

Source: Richardson RFPD

Dual Stage Low Noise Amplifier (LNA): MML09212H

This dual stage low noise amplifier operates in the 400-1400 MHz frequency range and is ideal for use in picocell, femotocell, tower-mounted amplifier, receiver front end circuit, cellular infrastructure, and other low noise, high linearity applications.

Dual Stage Low Noise Amplifier (LNA): MML09212H Features:

  •  Low Noise Figure: 0.52 dB @ 900 MHz
  •  Frequency: 400--1400 MHz
  •  Unconditionally Stable Over Temperature
  •  High Reverse Isolation: --58 dB @ 900 MHz
  •  P1dB: 22.8 dBm @ 900 MHz
  •  Small--Signal Gain: 37.5 dB @ 900 MHz (adjustable externally)
  •  Third Order Output Intercept Point: 37.5 dBm @ 900 MHz
  •  Active Bias Control (On--chip)
  •  Single 5 Volt Supply
  •  Supply Current: 150 mA
  •  50 Ohm Operation (some external matching required)
  •  Cost--effective QFN Surface Mount Package
  •  In Tape and Reel. T1 Suffix = 1,000 Units, 12 mm Tape Width, 7 inch Reel.