Control Products: Analog Devices


Analog Devices’ attenuators are available in a broad range of architectures and form factors, giving designers the flexibility to select a part best aligns with their system requirements. The parts are designed for the lowest insertion loss and best accuracy in the specified frequency range. Attenuators are manufactured in GaAs and Silicon (SOI) processes which make them versatile in performance and highly reliable in operation for a wide range of applications in instrumentation, communications, military, and aerospace markets.


 HMC1119 - 0.1 to 6 GHz, 1W, 7-bit DSA

 ADRF5721 | ADRF5731 - LF to 40 GHz, Silicon 4bit, DSA

 ADRF5720 | ADRF5730 - LF to 40 GHz, Silicon 6bit, DSA

 ADRF5473 - 100 MHz to 40 GHz, Die on Carrier, DSA

ADRF5474 - 10 MHz to 60 GHz, Die on Carrier, DSA

 ADRF5740 - 0.1 to 60 GHz, 4-bit DSA


Visit us at ADIs Attenuator Website for ALL your IC needs


RF Switches

ADI offers a wide range of high performance RF switches that are ideal for instrumentation, communications, military and aerospace applications. Manufactured in GaAs and Silicon (SOI) processes, RF switches feature higher power handling, better linearity and wider frequency band of operation compared to their CMOS counterparts. ADI’s new Silicon (SOI) RF switches offer unmatched performance in compact SMT form, which attains superior insertion loss, improved isolation, wider bandwidth and faster switching/settling times than any other solution.


ADRF5345 - 1.8 GHz to 3.8 GHz, High Linearity, Silicon SP4T Switch

 ADRF5160 - 0.7 to 4 GHz, 88W SPDT Switch

 HMC7992 - 0.1 to 6 GHz, 2W, SPDT Switch

 ADRF5250 - 0.1 to 6 GHz, 2W, SP5T Switch

 ADRF5040 - LF to 12 GHz, 33dBm, SP4T Switch

 ADRF5019 - LF to 13 GHz 35dBm, SPDT Switch

 ADRF5300 - 24 GHz to 32 GHz, Silicon SPDT Switch

 ADRF5024 | ADRF5025 - LF to 44 GHz, Silicon SPDT Switch

 ADRF5042 | ADRF5043 - LF to 44 GHz, Silicon SP4T Switch

 ADRF5047 - LF to 44 GHz, SP4T Switch

ADRF5424 - 100 MHz to 60 GHz, Die on Carrier, Silicon SPDT Switch


Visit us at ADIs RF Switch Website for ALL your IC needs


Massive MIMO Receiver Front-Ends ICs

ADI’s Receiver Front-End ICs incorporate high power switching and low noise amplification in compact size. Advanced circuit architecture minimizes the need for external components, creating an integrated front-end solution ideal for 5G Massive-MIMO applications. The devices feature single supply operation and interface for CMOS control signals, which makes them easy to use in multi-channel hardware designs with repeatable performance over the complete system. ADI provides reference design, measured s-parameters and evaluation boards from stock that gives the system engineers the advantage to reduce their development times.


ADRF5519 - 2.3 GHz to 2.8 GHz, Dual CH, Receiver Front End

ADRF5515 - 3.3 to 4.0 GHz, 20W, Dual CH, LNA+SW

ADRF5515A – 3.3 to 4.0 GHz 20W, Dual CH, LNA+SW (High Gain)

ADRF5545A - 2.4 to 4.2 GHz, 10W Dual CH, LNA+SW

Visit us at ADIs RF Front End IC Website for ALL your IC needs