Comb Generator - CGO-501, CGO-505
•Datasheet: Comb Generator - CGO-501, CGO-505
Com-Power model CGO-501 and CGO-505 Comb Generators are a broadband EMC signal source for quick EMC site testing. They radiate signals up to 1500 MHz.
EMC labs calibrate their radiated emissions test sites, instrumentation and accessories at least once a year. The calibration procedures are elaborate and time consuming. However, calibration does not prevent equipment malfunction in between calibration period such as damaged receivers, broken cables, poor connections, bad antenna, etc. Monitoring a few frequencies regularly on the Comb Generator's broadband radiated output can verify the entire setup quickly and efficiently. Any potential problems with the test setup can be detected before it causes erroneous results.
It is powered by a rechargeable NimH battery pack. It has circular shape for more uniform radiated output.
The table below gives the frequency step size of each model.
|
|
|
|
Frequency:
|
1 MHz - 1 GHz (CGO-501)
5 MHz - 1.5 GHz (CGO-505) |
|
Application:
|
EMI Radited Site Reference Source
|
|
Frequency Step Size
|
1 MHz step (CGO-501)
5 MHz step (CGO-505) |
|
Antenna:
|
5 inch monopole |
|
Power:
|
Battery 6 V NimH
|
|
Charger input:
|
7.5 VDC, 500 mA
|
|
Output connector:
|
BNC
|
|
Weight:
|
2 lbs. /0.9 kg
|
|
Size:
|
7 × 0.75 / 17.7 ×1.9
|
•Datasheet: Comb Generator - CGO-501, CGO-505