Benchtop Programmable Attenuators | 400-8400MHz

JFW has added two new benchtop programmable attenuator assemblies that operate 400-8400MHz. The attenuators have attenuation range 0-95dB x 1dB steps. They are rated for up to +24dBm of RF input power. Model 50BA-061-95 has 2 attenuators and the current attenuation settings are displayed on the front panel. Manual levers can be used to jog the attenuation up or down. Model 50PA-1322 is available with up to 9 attenuators and has a keypad with the Ethernet address displayed on the front panel.

Programmable Attenuators:

• 50 Ohm impedance
• 400-8400 MHz
• 0-95dB x 1dB steps
• +24 dBm input power
• SMA female

Available Benchtop Models:

• model 50BA-061-95 SMA | 2 attenuators with manual levers
• model 50PA-1322-XX SMA | up to 9 attenuators with a keypad