Product/Service

Bandpass Filters

Source: Trilithic Inc.
Trilithic Cavity Bandpass Filters exhibit lower losses and narrower bandwidths than most coaxial filters. The series CH and CR filters cover a frequency range from 30 MHz to 3,000 MHz. Percent 3 dB bandwidth ranges from 0.2% to 3%. The CR series uses 1 /4 wavelength resonant structures while the CH series uses a helical coil design to achieve lower frequency operation.
Bandpass Filters

 

Cavity Bandpass Filters

Trilithic Cavity Bandpass Filters exhibit lower losses and narrower bandwidths than most coaxial filters.

The series CH and CR filters cover a frequency range from 30 MHz to 3,000 MHz. Percent 3 dB bandwidth ranges from 0.2% to 3%. The CR series uses 1 /4 wavelength resonant structures while the CH series uses a helical coil design to achieve lower frequency operation.

Units are available with two through six sections providing a Chebyshev response with low insertion loss. VSWR is less than 1.5:1. Each unit is housed in a high "Q" sturdy aluminum case. Cavities are iris coupled and shielded to minimize RF leakage.

CH - Filters Helical Cavity 30 to 400 MHz 0.2% to 3% See Page 50 Large Very Low
CR - Filters 1 /4 Wave Cavity 400 to 3,000 MHz 0.2% to 3% See Page 50 Large Very Low

Download Cavity Filter Catalog Pages

 

Combline Cavity Filters

The combline style of filter offers the systems designer an extremely low insertion loss filter in the medium to wide bandwidth ranges. Typical losses are less than 1 dB for most designs with bandwidths of 5% or more.

CC - Filters 1 /4 Wave Cavity 300 to 18,000 MHz 0.2% to 60% See Page 52 Small to Large Very Low

Download - Combline Cavity Filter Catalog Pages

 

Tubular Coaxial Filters

Trilithic Tubular Bandpass Filters are a low ripple Chebyshev design and are available with 2 thru 12 sections in frequency ranges from 25 to 6,000 MHz with relative band-widths from 2% to 50%.

Six different sizes and frequency ranges allow for the selection of an optimal design for each requirement. Almost any type of input or output connection is available as a standard item.

BE Series
1 1/4 " Diameter

Mounting hardware available. See Mounting Options.

Specifications Standard Special

Electrical

Center Frequency MHz 40 to 600 25 to 1,000
Number of Sections 3 to 8 9 to 12
Nominal Impedance 50 Ohms 50/75 Ohms
Maximum VSWR 1.5:1 1.2:1
Percent 3 dB BW 3-40% 1-70%
Maximum Input Power (Average Watts to 10,000 ft.) See (1) Below See (1) Below
Maximum Input Power (Peak Watts to 10,000 ft.) See (1) Below See (1) Below
Environmental
Shock 15 G's 75 G's
Vibration 5 G's 30 G's
Relative Humidity 90% 100%
Altitude Unlimited Unlimited
Operating Temperature -20  to 50 C -55  to 125 C
Non-operating Temperature -54  to 70 C -55  to 150 C
Mechanical
Approximate Weight 1.5 Oz./ln. 1.5 Oz./ln.

(1) Dependent upon center frequency and percent bandwidth. Please consult factory for rated power.

Download Tubular/Coaxial Filter Catalog Pages

 

BD Series
3/4" Diameter

Mounting hardware available. See Mounting Options.

Specifications Standard Special

Electrical

Center Frequency MHz 80 to 1,000 40 to 1,700
Number of Sections 3 to 8 9 to 12
Nominal Impedance 50 Ohms 50/75 Ohms
Maximum VSWR 1.5:1 1.2:1
Percent 3 dB BW 3-40% 1-70%
Maximum Input Power (Average Watts to 10,000 ft.) See (1) Below See (1) Below
Maximum Input Power (Peak Watts to 10,000 ft.) See (1) Below See (1) Below
Environmental
Shock 15 G's 75 G's
Vibration 5 G's 30 G's
Relative Humidity 90% 100%
Altitude Unlimited Unlimited
Operating Temperature -20  to 50 C -55  to 125 C
Non-operating Temperature -54  to 70 C -55  to 150 C
Mechanical
Approximate Weight 1 Oz./ln. 1 Oz./ln.

(1) Dependent upon center frequency and percent bandwidth. Please consult factory for rated power.

Download Tubular/Coaxial Filter Catalog Pages

 

BC Series
1/2" Diameter

Mounting hardware available. See Mounting Options.

Specifications Standard Special

Electrical

Center Frequency MHz 100 to 2,000 60 to 3,000
Number of Sections 3 to 8 9 to 12
Nominal Impedance 50 Ohms 50/75 Ohms
Maximum VSWR 1.5:1 1.2:1
Percent 3 dB BW 3-40% 1-70%
Maximum Input Power (Average Watts to 10,000 ft.) See (1) Below See (1) Below
Maximum Input Power (Peak Watts to 10,000 ft.) See (1) Below See (1) Below
Environmental
Shock 15 G's 75 G's
Vibration 5 G's 30 G's
Relative Humidity 90% 100%
Altitude Unlimited Unlimited
Operating Temperature -20  to 50 C -55  to 125 C
Non-operating Temperature -54  to 70 C -55  to 150 C
Mechanical
Approximate Weight .75 Oz./ln. .75 Oz./ln.

(1) Dependent upon center frequency and percent bandwidth. Please consult factory for rated power.

Download Tubular/Coaxial Filter Catalog Pages

 

BBA Series
1/4" Diameter

Mounting hardware available. See Mounting Options.

Specifications Standard Special

Electrical

Center Frequency MHz 400 to 4,000 200 to 6,000
Number of Sections 3 to 6 7 to 8
Nominal Impedance 50 Ohms 50 Ohms
Maximum VSWR 1.5:1 1.2:1
Percent 3 dB BW 3-40% 1-70%
Maximum Input Power (Average Watts to 10,000 ft.) See (1) Below See (1) Below
Maximum Input Power (Peak Watts to 10,000 ft.) See (1) Below See (1) Below
Environmental
Shock 15 G's 75 G's
Vibration 5 G's 30 G's
Relative Humidity 90% 100%
Altitude Unlimited Unlimited
Operating Temperature -20  to 50 C -55  to 125 C
Non-operating Temperature -54  to 70 C -55  to 150 C
Mechanical
Approximate Weight .375 Oz./ln. .375 Oz./ln.

(1) Dependent upon center frequency and percent bandwidth. Please consult factory for rated power.

Download Tubular/Coaxial Filter Catalog Pages

 

Ultraminiature LC Filters

Click on the link above to go to the Ultraminature LC Filters page

For other RF / Microwave Filters from Trilithic click on the links below.