Q7-Series Inductors 7mm

Our coils and transformers are designed to suppress parasitics (IP3, distributed capacitance,cross talk,etc.)while maintaining High Reliability, High Q and a Low Temperature Constant. This is the best place to start when designing Filter and Precise circuits for RF.

Features:

• Customizable
• Mil Quality at a Commercial Price
• Highest Q for its size without the use of ferrites
• Seated in epoxy for moisture protection
• Magnetic and electrostatic shielding
• Very low TC<35 PPM / ° C
• Very low distributed capacitance (high Fo)
• Designed to meet Mil-C-15305 C, Grade 1
• Compatible with high temperature soldering and all cleaning processes

Materials:

• Pins are tin plated.
• Coil form is made of gloss woven polyester.
• The core structure of the coil consists of cup core and a threaded center core which combine to give good magnetic shield.
• Both core elements are made of powdered iron, to minimize performance variation with temperature.
• Electrostatic shield consists of a copper can, tin plated.

Notes:

The inductance adjustment range of Q3 type coils was deliberately stated below the attainable values by mechanically adjusting capability, in order to keep Q variations below 7%. Of course a larger adjustment range is possible if Q variation is not of great importance to the circuit.

Inductance and Q of the HF coils were measured on the HP 4323A Q meter. Data was obtained by the use of soldered leads, in order to avoid errors due to contact resistance.

Please note that the VHF-UHF coil inductance is indicated in nanohenires. The HF portion of the listing is stated in microhenries.

Coil Q products are RoHS compliant.

Made in the USA since 1968.