"3 PACK" Capacitor Banks
Source: Evans Capacitor Company
These "3 pack" capacitor banks provide a completely wired and sealed assembly of 3 THQ3 Hybrid Capacitors. The capacitor bank assembly consists of the 3 internal THQ capacitors, soldered to a custom designed circuit board, with all necessary balancing resistors, and wiring...
These "3 pack" capacitor banks provide a completely wired and sealed assembly of 3 THQ3 Hybrid Capacitors. The capacitor bank assembly consists of the 3 internal THQ capacitors, soldered to a custom designed circuit board, with all necessary balancing resistors, and wiring. The assembly is then completely sealed and epoxy potted in the rugged anodized aluminum case.
The three THQ3 capacitors may be wired in series, for higher voltage, or in parallel for higher capacitance. The case is anodized aluminum with threaded insert holes for mounting. Outside dimensions are 4.47 " X 1.59" X 1.07". Three feet of 16 AWG or 22 AWG (red, green, black) wire is provided. Full temperature range of -55C to 85C.
| 3P (parallel bank) Ratings are: | 3S (series bank) Ratings are: |
|
450,000µF at 10V
|
1,100µF at 300V
|
|
270,000 µF at 16V
|
1,900µF at 250V
|
|
160,000µF at 25V
|
2,800µF at 200V
|
|
110,000µF at 35V
|
4,000µF at 160V
|
|
70,000µF at 50V
|
|
|
36,000µF at 63V
|
|
|
25,000µF at 80V
|
|
|
16,000µF at 100V
|
|
|
10,000µF at 125V
|
|
This website uses cookies to ensure you get the best experience on our website. Learn more