Diplexers & Duplexers Products and Services
-
AMPS Band Isolation Duplexer
11/30/2006
Narda West’s AMPS Band High Isolation Duplexer provides highly selective receive/transmit combining
-
Ku‐Band 50W Diplexer: UFDX9999
8/8/2019
MtronPTI provides the UFDX9999 Ku Band high power diplexers incorporating highly selective high power handling bandpass filters for simultaneous transmit and receive operation with outstanding isolation between uplink and downlink feeds. They are ideally used for satcom and electronic warfare applications.
-
Ultra Compact L/S Band Filter Diplexer for UAV Communication
11/13/2013
The MtronPTI LF9422 L/S Band LC Filter Diplexer is custom designed for small form factor UAV-ISR platforms. Unlike open frame designs, the 1” x 1” wash-proof surface mount package is sealed, allowing automated assembly with no drift after board cleaning.
-
UMTS Band 2 Duplexer: ACMD-7407
12/3/2009
The Avago ACMD-7407 are highly miniaturized duplexers designed for use in UMTS Band 2 handsets and mobile data terminals.
-
823-961 MHz/1709-2171 MHz LC Diplexer
6/11/2012
This LC Diplexer is ideal for receiver-transmitter systems in the GSM, ISM, DCS, and PCS frequency bands. Port 1 – Port 3 operates in the 823 to 961 MHz frequency range, and Port 2 - Port 3 operates in the 1709 to 2171 MHz frequency range.
-
WiMax Duplexer
2/1/2012
This cavity duplexer for WiMax applications features a small form factor, low insertion loss, high channel selectivity, high isolation, with both custom and standard designs available. Its low channel center frequency runs from 3400 to 3500 MHz, and its high channel center frequency runs from 3500 to 3600 MHz. This WiMax Duplexer’s operating temperature runs from -40 °C to +90 °C, has SMA female connectors, has 100 MHz channel separation, 40MHz channel bandwidth, 1.5 dB max passband insertion loss, and 16 dB min passband return loss.
-
Ceramic Duplexer AE1600D809
8/7/2008
Anatech provides ceramic and cavity filters for INMARSAT communication applications
-
E-Band Diplexer
12/19/2005
K&L Microwave’s e-band diplexer consists of two waveguide bandpass filters specially designed to pass a relatively wide range of the spectrum: from 71 to 76 and 81 to 86 GHz respectively
-
Tunable Filters And Bandpass/Bandstop Diplexers - BT Series
5/8/2009
K&L Microwave’s tunable filters and bandpass/bandstop diplexers are usually used in test and measurement applications. Diplexers feature broadband matching at the common port, low insertion loss, and high isolation. Tunable filters are useful because they provide high performance in a single package. They can also be offered to cover frequencies as low as 800 KHz or as high as 3 GHz.
-
High-Power Ceramic Diplexers (Surface-Mount)
6/22/2009
In many cases, identification friend or foe (IFF) systems require diplexers to combine transmit and receive channels onto a single antenna. K&L Microwave’s 9DLX0-1030-1090/X8 is used on the interrogator, transmitting at 1030 MHz. The 9DLX0-1090-1030/X8 is for use in the transponder. Both parts are rated to handle 800 watts of peak power and can be used in military airborne and ground applications.