Products and Services
-
Hand Held Direction Finder With I/Q Analysis: IDA 2
3/4/2014
Narda Safety Test Solutions has equipped the second generation of its Interference and Direction Analyzer (IDA 2) with I/Q analyzer functions. Based on the I/Q data, the device generates high resolution spectrograms, persistence spectrums and time domain displays that were previously only available from high cost laboratory instruments. Radio spectrum interference and impairments can thus be detected and analyzed on the spot.
-
500W High Power Amplifier, 3U Chassis
9/5/2013
Empower RF Systems continues to leverage next generation hardware and software architecture with the next series of the ‘’size matters” portfolio - 500W in 3U chassis. This new Power Amplifier family operates in the frequency ranges of 20 - 500 MHz (Model 2173), 500 - 1000 MHz (Model 2174) and 20 - 1000 MHz (Model 2175) with the output power guaranteed over full bandwidth and temperature.
-
R&S NGL200 Power Supply Series
3/8/2024
Accuracy and fast load recovery times make the NGL200 DC power supply series ideal for challenging applications, such as battery tests, power consumption tests, simulation of voltage drops, and more.
-
Times-Protect Smart-Panel®
6/20/2013
The Smart-Panel® provides for highly desirable single pointgrounding while eliminating the expense and potential incorrect installation of external grounding kits. The Smart-Panel®design provides for bulkhead mounting of the surge protectors directly on the panel for superior surge performance. Also eliminated are the traditional internallightning protector “trapeze”as well asthe external copper master ground bar sothere’s nothing to steal outside the shelter!
-
WPS-343724-02 3.4-3.7 GHz Linear Power Amplifier
2/15/2006
The WPS-343724-02 is a 4 watt amplifier pre-matched to 50 ohm operating over frequency range 3.4 GHz to 3.7 GHz. The RF gain is 14 dB. The typical output IP3 is 50 dBm and P1dB is 36 dBm
-
VCXO with Extended Temperature Range: VFHV570
10/27/2011
The VFHV570 voltage controlled crystal oscillator (VCXO) offers wide pull range with extended temperature range. The device delivers frequency stability of ±50ppm and is also available across the industrial temperature range of -40°C to +175°C in a 5.0 x 7.0 mm SMD package, and is ideal for military, industrial and High Temperature Commercial applications.
-
Rear Mount Bulkhead SMA Connectors
11/21/2008
SMA connectors, short for SubMiniature Version A, are semi-precision, subminiature devices that provide repeatable electrical performance from DC to 12.4 GHz with flexible cable. SMA connectors feature screw-type coupling. Semi-Rigid cabling extends the frequency range of the device to 18GHz. SMA connectors offer broadband performance with low reflections and constant 50 ohm impedance. These properties, along with minimum attenuation and low VSWR have made the SMA connector extremely popular in the microwave community. LTI SMA connectors are designed to conform to MIL-C-39012 specifications.
-
X-Band Amplifier Modules
7/29/2005
e2v technologies have developed a range of X-Band Amplifier modules, for general purpose application. A range of gain, noise figure and IP3 performances are covered, and the designs can be customized to other frequencies within X-Band...
-
Low Noise Amplifier
12/21/2000
The CHA2194-99F/00 is a new self-biased low noise amplifier designed to cover the 38 GHz Point to Point and 40-44 GHz Point to Multipoint applications into the Broadband...
-
Microwave Detectors: 10 MHz To 40 GHz Testing And Term Definition
7/30/2009
Krytar manufactures microwave detectors using zero bias silicon schottky diodes and planar doped detector diodes. Testing and Term definition for performance of the two types are identical.