RF Test And Measurement Resource Center

TEST & MEASUREMENT APPLICATION NOTES AND WHITE PAPERS

Navigating Design Complexities With Qorvo's Innovative Software Tools
Unlock the power of Qorvo's Design Hub, providing engineers with cutting-edge RF and analog design tools previously exclusive to Qorvo teams. Streamline your projects with precision and efficiency.
Radiated Wireless Coexistence Testing
This application notegives the reader a clear idea of how to configure standardized test instruments from R&S in order to generate the wanted signal as well as unintended interference signals and conduct measurement to monitor device performance.
Verifying The Clock Source
In order to select or develop a clock generator to use in your design or to ensure that the supplied system clock has the proper performance, you'll need to consider phase noise, jitter, wideband noise and spurs as performance indicators.
AC-DC Converter Testing Fundamentals
AC-DC conversion stage in front of any electronic equipment is needed. For this purpose, different solutions exist to convert the higher AC voltage to a lower and safe DC voltage.
How To Test USB Power Delivery Over Type-C
USB Type-C compliance test standards are more complex due to higher data transmission speeds and more power. Successful testing requires accurate and compliant test instruments, software, and fixtures.

More Test & Measurement Application Notes and White Papers

TEST & MEASUREMENT SOLUTIONS

TWT Amplifier: dB-3908

The dB-3908 TWT Amplifier (TWTA) is designed to use two wideband, periodic permanent magnet (PPM)-focused TWTs to amplify CW, AM, FM or pulse-modulated signals. The dB-3908 offers higher saturated output power and improved harmonic performance when compared to a single TWT approach.

TWT Amplifier: dB-3907

The dB-3907 TWT Amplifier (TWTA) is designed to use two wideband, periodic permanent magnet (PPM)-focused TWTs to amplify CW, AM, FM or pulse-modulated signals. The dB-3907 offers higher saturated output power and improved harmonic performance when compared to a single TWT approach.

MXO 5 Series Oscilloscope

The MXO 5 Series delivers breakthrough oscilloscope technology to speed up your understanding and testing of electronic systems.

High Power Family Of Products For EW, ECM, Radar/Comm Applications

dB Control’s family of traveling wave tube amplifiers (TWTAs) features a combined frequency range of 2 to 18 GHz up to 15kW output power. dB Control utilizes our proprietary transformer fabrication, encapsulation and high-voltage potting techniques developed for demanding military applications which results in superior reliability, low cost and ease of maintenance. Products in this series are ideal for several applications, including: test and measurement, electronic warfare (EW) simulation, RFI/EMI/EMC Testing, electronic countermeasures (ECM), and antenna pattern and radar-cross section measurements.

Extended Frequency Spectrum Analyzer: EVO-RSA-6070A

The EVO-RSA-6070A is part of the EVO Series of extended frequency spectrum analyzers from Avcom designed for higher performance and agility in applications with continuously changing requirements. The included SDR-style technology analyzer includes a wide bandwidth receiver and employs FPGA, DSP, and high-performance processors.

8-Channel A/D & D/A QuartzXM eXpress Module: Model 6003

Pentek offers the Quartz® Model 6003 high-performance Quartz eXpress Module (QuartzXM) based on the Xilinx Zynq UltraScale+ RFSoC FPGA. The RFSoC FPGA integrates eight RF-class A/D and D/A converters into the Zynq’s multiprocessor architecture, creating a multichannel data conversion and processing solution on a single chip.

26 GHz Sentinel Intelligent Signal Scanner Recording System: Talon® RTX 2684

Pentek offers the Talon® RTX 2684 as a 26 GHz sentinel intelligent signal scanner recording system. The system provides SIGINT engineers the ability to scan the RF spectrum from 1 GHz to 26 GHz for signals of interest and monitor or record bandwidths up to 500 MHz wide.

Microwave And RF Test Assemblies: GORE® PHASEFLEX® Series

The GORE® PHASEFLEX® Series offers the smallest, lightest, internally ruggedized microwave/RF test assemblies for high density interconnection in RF and uW modular applications as well as in high speed digital testing. These assemblies feature ON cable construction and provide consistent, repeatable measurements with electrical performance up to 18, 26.5, 40, or 50 GHz.

More Test & Measurement Solutions