RFSA2013/RFSA2023: Voltage Controlled Attenuators

RFMD delivers a revolutionary new circuit architecture in the RFSA2013 and RFSA2023. Both products are fully monolithic analog voltage controlled attenuators (VCAs) that feature exceptional linearity over a typical temperature compensated 30dB gain control range. Each of these VCAs is controlled by a single positive control voltage with on-chip DC conditioning circuitry. These game-changing products incorporate the complete solution in a small 3mm x 3mm, QFN package that reduces the footprint by 20x and the DC power by 10x over conventional PIN diode approaches.

Details

RFMD's RFSA2013 is a fully monolithic analog voltage controlled attenuator (VCA) featuring exceptional linearity over a typical temperature compensated 30dB gain control range. It incorporates a revolutionary new circuit architecture to solve a long standing industry problem: high IP3, high attenuation range, low DC current, broad bandwidth and temperature compensated linear in dB control voltage characteristic. This voltage controlled attenuator is controlled by a single positive control voltage with on chip DC conditioning circuitry. The slope of the control voltage versus gain is selectable. The RFSA2013 draws a very low 1mA current and is packaged in a small 3mm x 3mm QFN. This attenuator is matched to 50Ω over its rated control range and frequency with no external matching components required. Typical VCA's in this performance category have poor inherent attenuation versus temperature and poor nonlinear attenuation versus control voltage characteristics. To correct these shortcomings, other VCA's require extensive off chip analog support circuitry that consume valuable PCB area and additional DC power. This game changing product incorporates the complete solution in a small 3mm x 3mm QFN package that reduces the footprint by 20X in area and reduces the DC power by 10X over conventional PIN diode approaches.

Click Here To Download:
•Datasheet: RFSA2013 Voltage Controlled Attenuators

RFMD's RFSA2023 is a fully monolithic analog voltage controlled attenuator (VCA) featuring exceptional linearity over a typical temperature compensated 30dB gain control range. It incorporates a revolutionary new circuit architecture to solve a long standing industry problem: high IP3, high attenuation range, low DC current, broad bandwidth and temperature compensated linear in dB control voltage characteristic. This voltage controlled attenuator is controlled by a single positive control voltage with on chip DC conditioning circuitry. The slope of the control voltage versus gain is selectable. The RFSA2023 draws a very low 1mA current and is packaged in a small 3mmΩxΩ3mm QFN. This attenuator is matched to 50Ω over its rated control range and frequency with no external matching components required. Typical VCA's in this performance category have poor inherent attenuation versus temperature and poor nonlinear attenuation versus control voltage characteristics. To correct these shortcomings, other VCA's require extensive off chip analog support circuitry that consume valuable PCB area and additional DC power. This game changing product incorporates the complete solution in a small 3mmΩxΩ3mm QFN package that reduces the footprint by 20X in area and reduces the DC power by 10X over conventional PIN diode approaches.

Click Here To Download:
•Datasheet: RFSA2023 Voltage Controlled Attenuators

Need More Information? Just Ask.

Click the button below to directly contact the supplier. Use it to:

Ask a question.
Request more detailed information or literature.
Discuss your current project/application.
Request a quote.
Locate a distributor in your area.
Schedule a demo.

Free RF Globalnet Newsletter

RF Micro Devices, Inc.