MMIC Amplifiers

This RF amplifier operates in the DC-20 GHz frequency range and features small die size, a low noise figure, and low current consumption. This amplifier is ideal for microwave radio and VSAT, telecom infrastructure, test instrumentation, and military and space applications.

The µPC2745TB and µPC2746TB are silicon monolithic integrated circuits designed as buffer amplifier for mobile communications. These low current amplifiers operate on 3.0 V (1.8 V MIN.).

Mimix Broadband's two stage 26.0-40.0 GHz GaAs MMIC power amplifier is optimized for linear operation with a typical third order intercept point of +34.0 dBm...

REMEC D&S designs high-performance, cost-effective MMICs, including low-noise and high-power amplifiers, switches, phase shifters, detectors, and attenuators from RF, microwave, and millimeter wave (mmWave) bands for next generation space, missile defense, communication, and unmanned aerial vehicle applications.

The MMA-022020B is a 2 - 20GHz broadband MMIC medium power amplifier with 22.5 dBm output power. It is realized in advanced 0.25um AlGaAs/InGaAs pHEMT technology. The usable frequency range extends to 1 – 22 GHz. With on-chip input/output blocking capacitors and DC supply RF choke circuitry, it only requires simple DC bias circuits and RF connections for broad range applications

Mini Circuits offers the CMA-83LN+ low noise MMIC amplifier operating from 0.5 to 8.0 GHz for sensitive, high-dynamic range receiver applications. The amplifier offers flat gain and a P1dB of 20.3 dBm at 2 GHz with a noise figure of 1.3 dB. It operates on a single 5 V or 6 V supply and is well matched f to 50 ohms.

The MMIQA-0218HPSM is a versatile, robust, and broadband IQ mixer with an integrated broadband LO driver amplifier. It is ideal for IQ, single sideband, and image reject mixing applications

The MHA-495433 is a high-performance reliable MMIC power amplifier utilizing high-reliability, high-breakdown voltage InGaP HBT technology. Power MMIC is ideally suited for driver or output stages in wireless applications such as 802.16 WiMAX, 802.11 WLAN & ISM, point-to-point radios & Telecom Infrastructure. MHA-495433 HBT MMIC Power Amplifier Chip has 50-ohm fully-matched output, pre-matched input, on-chip DC blocking capacitor, active bias and power detector built into the chip.