Attenuators
PRODUCTS AND SERVICES
Model 50HFFA-xxx-50/18 is a 50 Ohm coaxial fixed attenuator rated at 50 Watts average input power and operates DC-18 GHz.
Model 50PA-1249-XX is a 19-inch rack mount attenuator assembly containing 50 Ohm solid-state step attenuators. The number of attenuators can be selected from 1 to 8 attenuators.
Model 50BA-057-95 is a 50 Ohm benchtop attenuator assembly containing two solid-state step attenuators with a range of 0 to 95dB by 1dB steps and operates from 200 MHz to 7125 MHz.
The ATN00-00110CH family of precision GaAs MMIC fixed attenuators are an ideal solution for attenuating a signal, and they can be used in a wide range of applications.
The Model 50HFFB-xxx-5/40 DC-40 GHz attenuator is rated for a 5-watt average and is available with 2.92mm male/female connectors.
The Skyworks family of wireless jitter attenuators offers CMOS integration, reduced power, low noise and size without compromising the stringent performance and reliability required in wireless applications.
The TSX Series of chip attenuators pushes the boundaries of SWaP in a cost effective, easy-to-implement surface mount solution, suitable for a wide array of applications.
Model 50BA-056-95 is a 50 Ohm benchtop attenuator assembly containing one solid-state step attenuator with a range of 0 to 95dB by 1dB steps and operates from 200 MHz to 7125 MHz.
ABOUT
Attenuators are the exact opposite of an amplifier. An attenuator is used to reduce the intensity of either electricity or sound. For example, the digital impulse that is used to drive a speaker may be stepped down to prevent the lower range speakers from failing. An equalizer in music is a form of amplifier and attenuator rolled up into one. However, it targets on particular frequency. Every instrument in a musical symphony and even the human voice occupy a certain frequency range. As an example, each note of a violin has a very specific frequency. The A string on a violin is exactly 440Hz. Using an attenuator, one can target the exact frequency of 440Hz and reduce its intensity. It can even be attenuated all the way down to zero. If this were to happen, then every time an A not of a violin was played, it would not be heard.
This sort of technology is used to clean up sounds of recordings and other sounds in a recording. It is even possible to pinpoint the frequency range of the human voice then use an attenuator to reduce it to zero. Imagine if one were to take a recording of a song and attenuate just the vocal portion, the song will now resemble a minus-one track.
Attenuators have other more sophisticated commercial uses. They can be used to reduce the electrical impulses that were amplified to travel long distances and may still carry strong energy when it arrives, so it needs to be attenuated before it is channeled for processing.