Products and Services
-
Mid- And High-Band Front-End Module For 3G, 4G, And 5G Applications: SKY5®-8085-11
11/20/2020
The SKY58085-11 is a mid- and high-band front end module (FEM) designed to support 3G/4G/5G mobile devices and operate efficiently in 3G/4G/5G modes. This model meets stringent 5G NR and LTE advanced requirements where wider bandwidth and carrier aggregation are utilized for high data rates.
-
Dual-Channel Switch LNA Module: QPB9318
3/17/2017
Qorvo offers the new QPB9318 highly integrated front-end module with operation in the 2.3 – 2.8 GHz frequency range for TDD base station, wireless infrastructure, small cell BTS, and pre-5G/5G massive MIMO applications. This LNA module integrates a two-stage LNA and a high power switch in a dual-channel configuration.
-
DRx Front-End-Modules
4/1/2015
Skyworks DRx front-end-modules have been designed to improve receiver sensitivity and data throughput in 3G/4G multimode cellular tablets and handsets, while also reducing Rx noise figure. The FEMs are comprised of low loss RF switches, as well as receive SAW filters and low noise amplifiers.
-
LTE Universal Multi-Band Front-End Module For IoT: SKY68020-11
9/20/2018
Skyworks offers the new SKY68020-11 LTE universal hybrid, multi-band multi-chip RF front-end (RFFE) module supporting cellular LTE-M/NB-IoT (half-duplex system) transceiver platforms operating in low-band (5, 8, 12, 13, 14, 17, 18, 19, 20, 26, 28, 71, and 85), and mid-band (1, 2, 3, 4, 25, 39, 66, and 70) frequencies.
-
2.4 GHz Wi-Fi 6 Front End Module: QPF4211
3/7/2023
The Qorvo® QPF4211 is an integrated medium power front end module (FEM) designed for Wi-Fi 6 (802.11ax) systems. The small form factor and integrated matching minimizes layout area in the application.
-
Dual-Channel Switch LNA Module: QPB9378
8/17/2022
The QPB9378 is a highly integrated RF front-end module targeted for 5G TDD base stations. The module integrates a two-stage LNA and a high-power SPDT switch in a dual-channel configuration.
-
2.4 GHz Front End Module For Mobile Devices, Game Consoles, And Tablets
2/25/2015
The SKY85203-11 is a front-end module designed for 802.11b/g/n set-top boxes, mobile devices, gaming consoles, and tablets. It integrates an SP3T switch and an LNA with a bypass mode. The module comes in a QFN, 12-pin 2 x 2 x 0.45mm package and has a 14dB receive gain, a noise figure of 2.1dB, and a Transmit/Bluetooth® path loss of 0.7dB.
-
9 – 10.5 GHz GaN T/R Module: QPM2637
2/12/2019
he QPM2637 is a Gallium Nitride MMIC front-end module (FEM) designed for X-Band radar applications within the 9-10.5 GHz range. The MMIC combines a T/R switch, low-noise amplifier, and a power amplifier. The receive path has dual-outputs which offer 21dB gain and 2.7dB noise figure. The transmit path delivers 4W of saturated power with 23dB large signal gain. The FEM is robust up to 4W of input power into the ANT port eliminating the need for a limiter.
-
2.4 GHz Wi-Fi 6 bandBoost Integrated Front End Module: QPF7250
2/13/2023
The Qorvo QPF7250 is an integrated front end module (iFEM) designed for Wi-Fi 6 (802.11ax) systems which marries the advantages of active components with edgeBoost filter technology.
-
Wi-SUN Front-End Module: SKY66122-11
6/14/2021
The SKY66122-11 is a high-performance, highly integrated RF front-end module (FEM) designed for high-power Industrial, Scientific, Medical (ISM) band, Wi-SUN, and other IOT applications operating in the 863 to 928 MHz frequency range.