Products and Services
-
S-Band Radar, 2729-170, 2700-2900 MHz, Class C, Common Base-Pulsed RF Power Transistor
8/1/2004
S-Band Radar, APT-RF's 2729-170 is an internally matched, COMMON BASE bipolar transistor capable of providing 170 Watts of pulsed RF output power at 100µs pulse width, 10% duty factor across the 2700 to 2900 MHz band...
-
30 kHz - 80 GHz Traveling Wave Amplifier: AMMC-5025
12/1/2009
The Avago AMMC-5025 is a 30KHz to 80GHz ultra broadband traveling wave amplifier. This device is suitable for instrumentation and high speed digital communications.
-
MLDD 4-Way Power Dividers
12/15/2022
KRYTAR MLDD 4-way power dividers lend themselves to emerging wireless ultra-broadband designs and many test and measurement applications.
-
Space Flight SP4T Coaxial Switch
6/13/2014
High reliability single pole 4 throw RF coaxial switch for space applications. The operating frequency is from 300 MHz to 2500 MHz with input power of 5 Watts CW. It operates at 12.0 Vdc to 15.0 Vdc at extreme temperature of -40°C to +85°C. The switch is latching type and equipped with suppression diodes, telemetry circuitry and radiation shielding of 300 KRad minimum.
-
X-Band, GaN/SiC Power Transistor: IGT1112M90
5/14/2019
Integra Technologies offers the IGT1112M90 X-band, GaN/SiC power transistor designed to meet the requirements of radar systems operating in the X-band. Operating in the 10.8 – 11.8 GHz frequency range with under 150µs and 10% duty cycle pulse conditions, the device supplies a minimum of 90 W of peak output power, with an associated 9 dB of gain and 35% efficiency.
-
MHA-242733-Q5: 2400 To 2700 MHz Fully Matched Power Amplifier
7/2/2008
The MMA-242733-Q5 is a high linearity InGaP HBT MMIC amplifier. It is in a low cost QFN 5X5mm Green Package. Applications include the driver and the output stage of the power amplifiers for WLAN and WiMax infrastructure base stations and access points. The third order intercept performance of the MMA-242733-Q5 is excellent and is typically 11 dB above the 1 dB gain compression point. It provides +33 dBm P1dB, +44 dBm OIP3 and output power of +26 dBm @ 2.5% EVM under 802.16/64 QAM test signal.
-
300 To 2200 MHz Ultra Low-Noise Amplifier: SKY67150-396LF
1/22/2014
The SKY67150-396LF is GaAs, pHEMT Low-Noise Amplifier (LNA) with an active bias, high linearity, superior gain, and industryleading Noise Figure (NF) performance. The device features Skyworks advanced, pHEMT enhancement mode process in a compact 2 x 2 mm, 8-pin Dual Flat No-Lead (DFN) package.
-
Mobile Device Design Using Electromagnetic Simulation
7/19/2017
Precision is key when designing today’s complex mobile devices, and engineers can’t afford discrepancies between device efficiency and simulation results. Remcom users see less than a 0.5 dB difference in device efficiency when compared to electromagnetic simulation results. Importing the right CAD model achieves a higher level of accuracy with measurements that are exceptionally close to the real device, streamlining workflow and simplifying the design process.
-
ConnexNetTM
11/20/2006
ConnexNet provides a complete hardware and software solution for adding wireless network connectivity to serial-based applications. The transceiver serves as a conduit between the user and multiple destination devices via a local network or Internet connection. It integrates a fully developed TCP/IP network stack and OS using a variety of network protocols to make distant networking both easy and reliable
-
Ultra-Low Noise 2-Stage Bypass LNA: QPL9065
7/27/2017
Qorvo offers the QPL9065 high-linearity, ultra-low noise gain block amplifier with integrated bypass mode functionality. This 2-stage LNA is ideal for a wide range of applications including base station receivers, tower mount amplifiers, repeaters, FDD-LTE, TDD-LTE, WCDMA, and general purpose wireless systems.