Analyzer Products & Services
-
Microwave Site Master Handheld Cable and Antenna Analyzer: S820E
3/17/2014
Anritsu’s Site Master™ S820E is the highest performance, rugged, hand-held microwave cable/antenna analyzer covering 1 MHz to 40 GHz range. Utilizing the latest advancements in NLTL technology, the S820E architecture enables benchtop performance in a portable package.
-
Remote Analyzer with receiver characteristics: NRA-6000 RX
2/5/2015
Remote controlled Remote Analyzer with receiver characteristics having an unusually comprehensive range of features, making it exemplary value for money. It is especially suitable for radio monitoring. NRA-6000 RX provides comprehensive analysis of all radio frequency ranges including the latest mobile communications bands (from TETRA through to GSM, UMTS, WiMAX and LTE).
-
26.5 GHz Phase Noise Analyzer: NXA-26
5/15/2012
This phase noise analyzer measures Absolute and Residual phase noise and offers Amplitude noise options. It can also measure phase and amplitude noise on pulsed signals.
-
FFT Analyzer: EHP-50F
6/2/2015
The EHP-50F is a new FFT analyzer used to measure and analyze electric and magnetic strengths in the 1Hz to 400 kHz frequency range. Using the weighted peak method specified in the latest released standards, the analyzer evaluates complex signal shapes in the time domain, while providing automatic frequency evaluations for many applications including power supply stations and transformers, high-tension lines, industrial equipment, and medical technology.
-
Handheld Vector Network Analyzer: R&S®ZNH
3/15/2021
The R&S®ZNH from Rohde & Schwarz is a full two-port handheld vector network analyzer, offering one-port cable and antenna measurement and full two-port S-parameter measurements. The analyzer features a small form factor but can deliver high performance and all the key functionalities.
-
20 GHz High-Performance Spectrum Analyzer: SM200A
3/14/2018
Signal Hound introduces the new SM200A 20 GHz RF spectrum analyzer and monitoring receiver designed for applications ranging from IoT and 5G cellular, to military, aerospace, spectrum management, automotive, and radar. This instrument is optimized to lower the cost of entry to high-end spectrum analysis while delivering the high performance required for the most demanding environments.
-
7 GHz Signal Analyzer: Model 7070
1/16/2014
This signal analyzer covers the 5 MHz to 7 GHz frequency range and offers measurements down to -185 dBc/Hz. It’s ideal for general purpose phase and amplitude noise tests, automated production testing, time domain and spectrum analysis, and cross-correlator FFT analysis.
-
Rack Mount Extended Frequency Remote Spectrum Analyzer: EVO-RSA-6070A
1/31/2019
Avcom offers the new EVO-RSA-6070A as part of the EVO Series of rack mount analyzers. This extended frequency remote spectrum analyzer is designed to operate in the 70 MHz – 6 GHz frequency range. This SDR-style technology analyzer with a wide bandwidth receiver, employing FPGA, DSP, and high-performance processors. The analyzer is based on a hybrid swept-FFT technology which provides extended frequency range and higher resolution.
-
ShockLine™ Compact USB Vector Network Analyzer: MS46122B
11/23/2014
The MS46122B is a series of three PC-controlled Compact ShockLine Vector Network Analyzers with a frequency range from 1 MHz to 8/20/43.5 GHz. The series benefits from patented ShockLine VNA-on-chip technology, which simplifies the internal VNA architecture at high frequencies, reduces instrument cost, and enhances accuracy and measurement repeatability.
All the members of the MS46122B series are low cost full-reversing 2-port VNAs aimed at RF and microwave applications in manufacturing, engineering and education. All three MS46122B VNAs have 220 microseconds per point sweep speed and better than 100 dB dynamic range making them suitable for a variety of device test applications.
-
Vector Network Analyzer: R&S®ZNA
2/21/2019
Rohde & Schwarz offers the new R&S®ZNA vector network analyzer with DUT-centric operating features that guide users quickly and conveniently to the desired measurement setup. With exceptional stability, low trace noise and excellent raw data capabilities, the analyzer is ideally suited for development and production applications that require high accuracy, such as developing and producing components and modules for A&D and satellite applications.