Test And Measurement Products

  1. R&S ESU EMI Test Receiver
    6/28/2006

    The R&S ESU from Rohde & Schwarz is a new family of CISPR16-1-1-compliant EMI test receivers that meet all civil and military standards for electromagnetic interference measurements. New FFT-based test methods speed up the measurement. With the time-domain scan, users can perform overview measurements up to 100 faster than on previous EMI test receivers. The instrument also features comprehensive test functions such as a complete set of parallel detectors including the new CISPR-RMS detector, RF scan, IF analysis and numerous report functions. The R&S ESU is available in three models with the frequency ranges 20 Hz to 8 GHz, 26.5 GHz and 40 GHz.

  2. Statistical Power Sensor: 7022
    10/7/2014

    A signal’s average power isn’t a sufficient enough control variable for modern day communications. It’s still an important parameter, but today’s signals typically require more diagnostic measurements. Bird’s 7022 is a statistical power sensor that uses statistical sampling techniques to measure the percentage of time the signal exists at a specific peak-to-average ratio.

  3. Synthesized Signal Generators: 4 GHz To 20 GHz
    8/22/2011
    The Lab Brick LMS Signal Generator series of USB-compatible synthesized signal generators cover the X-band frequency from 4 GHz to 20 GHz with low phase noise, fast 100 microsecond switching time, and fine 100 Hz frequency resolution. They require no additional DC supply voltage and offer advanced features such as phase continuous linear frequency sweeping, internal/external 10 MHz reference, and optional pulse modulation. GUI software can track and control several connected signal generators, simplifying multiple-signal test setups. Each device stores settings in internal memory, allowing it to power up in a specific instrument state.
  4. ShockLine™ Compact USB Vector Network Analyzer: MS46122B
    11/23/2014

    The MS46122B is a series of three PC-controlled Compact ShockLine Vector Network Analyzers with a frequency range from 1 MHz to 8/20/43.5 GHz. The series benefits from patented ShockLine VNA-on-chip technology, which simplifies the internal VNA architecture at high frequencies, reduces instrument cost, and enhances accuracy and measurement repeatability.

    All the members of the MS46122B series are low cost full-reversing 2-port VNAs aimed at RF and microwave applications in manufacturing, engineering and education. All three MS46122B VNAs have 220 microseconds per point sweep speed and better than 100 dB dynamic range making them suitable for a variety of device test applications.

  5. 20 GHz High-Performance Spectrum Analyzer: SM200A
    3/14/2018

    Signal Hound introduces the new SM200A 20 GHz RF spectrum analyzer and monitoring receiver designed for applications ranging from IoT and 5G cellular, to military, aerospace, spectrum management, automotive, and radar. This instrument is optimized to lower the cost of entry to high-end spectrum analysis while delivering the high performance required for the most demanding environments.

  6. Isotropic "E" Field Probe, 100 kHz to 3 GHz, 0.4 to 660 V/m
    9/30/2005

    The FP7003 is a broadband isotropic electric field measurement instrument for use in EMC and EMI applications

  7. 1800 W, 65 V, 1.0 – 1.1 GHz Highest Power GaN Transistor On The Market: QPD1025L
    6/29/2018

    Qorvo offers the 1800 W, 65 V, 1.0 – 1.1 GHz QPD1025L as the highest GaN transistor on the market. This discrete GaN on SiC HEMT has a package that features input pre-match resulting in ease of external board match and saved board space.

  8. RF Field Probes And Monitors
    8/4/2007

    These E-field laser probes contain an internal microprocessor that enables them to "think" for themselves and adapt to their environment. This provides optimal linearization, temperature compensation, control, and communication functions. AR's six E&H field probes cover the range from 100 kHz - 60 GHz, 0.4 to 1,000 V/m, 0.012 to 17 A/m.

  9. 800 To 2500 MHz Fan-Out CANbus-Based Switch Matrix With Ethernet Interface
    5/10/2007
    Dow-Key Microwave’s Solid Switch Matrix with Ethernet control interface, performs from 800 to 2500 MHz and is available in full fan-out configurations from 6X6 to 12X12
  10. Chip Scale Package EMI/RFI Filter Arrays
    9/28/2000
    The WLP200 is an evaluation RC filter network suited for mobile equipment. The device consists of 6 channel RC filters with different...