Switch

  1. 0.4 to 5.9 GHz DPDT Low Insertion Loss/High Isolation Switch: SKY13698-694LF
    4/25/2017

    Skyworks’ new SKY13698-694LF is a CMOS, silicon-on-insulator (SOI) double-pole, double-throw (DPDT) switch designed for LTE system and main/diversity antenna swapping applications. Able to provide high-linearity performance, low insertion loss, and high isolation, this switch operates within the 0.4 to 5.9 GHz frequency range with a positive control voltage range from 1.35 to 2.8 V.

  2. 0.1 To 6.0 GHz SPDT Switch: SKYA21003
    1/4/2017

    The SKYA21003 from Skyworks is a single-pole, double-throw (SPDT) switch designed for use in a wide variety of automotive applications including infotainment, automated toll systems, 802.11 b/g/n WLAN, Bluetooth® systems, remote keyless entries, telematics, and GPS/navigation.

  3. Wi-Fi, Bluetooth® And Zigbee® RF Switches
    8/25/2016

    Skyworks introduces two new Wi-Fi switches that are optimized for WLAN networks, repeaters, ISM band radios, smartphones, connectivity modules, and Bluetooth® and Zigbee® systems. The SKY13585-679LF single-pole double-throw (SPDT) switch operates within the 1 to 6 GHz range, and maintains low insertion loss and high isolation for all switching paths. The SKY13586-678LF is a single-pole triple-throw (SP3T) switch specifically designed to operate within 2.4 GHz Wi-Fi applications.

  4. SKY13588-460LF: 0.1 To 6.0 GHz SP3T Switch
    8/11/2016

    The SKY13588-460LF is a CMOS silicon-on-insulator (SOI), single-pole, triple-throw (SP3T) switch. The high-linearity performance and low insertion loss makes the device an ideal choice for WCDMA handset and data card applications.

  5. SKY13587-378LF: 20 MHz To 6.0 GHz GaAs SPDT Switch
    8/11/2016

    The SKY13587-378LF is a pHEMT GaAs FET I/C switch. The switch can be used in transmit/receive applications by connecting the RF common port (INPUT, pin 5) to either the OUTPUT1 or OUTPUT2 port (pin 1 or 3, respectively) using a low-loss path (i.e., a positive voltage applied to either VCTL1 or VCTL2 pins). The switch is “reflective short” on the isolated port.

  6. SKY13548-385LF: 5 To 1800 MHz Single Control SPDT
    8/11/2016

    The SKY13548-385LF is a single-pole, double-throw (SPDT) 75 Ω switch intended for mode switching in either pre-select filter or post-select filter in STB and cable modem applications. Using advanced switching technologies, the SKY13548-385LF maintains low insertion loss and high isolation for all switching paths.

  7. SKY13547-490LF: 5 To 1800 MHz Ultra-High Linearity SPDT 75 Ω Switch
    8/11/2016

    The SKY13547-490LF is a single-pole, double-throw (SPDT) 75 Ω switch. The high linearity and low insertion loss of the SKY13547-490LF meet the most stringent requirements of DOCSIS 3.1 applications.

  8. 0.1-6.0 GHz High Isolation SPDT Absorptive Switch: SKY13286-359LF
    6/8/2016

    The SKY13286-359LF is a GaAs pHEMT FET, single-pole, double throw (SPDT) absorptive switch that operates in the 0.1 to 6.0 GHz frequency range and is ideal for wireless local loops, GSM, PCS, and WCVMA base stations, and 2.4 and 5.8 GHz ISM devices.

  9. 1.8-3.0 GHz High-Power SPDT Switches With Integrated Drivers
    5/23/2016

    Skyworks’ SKY12241-492LF and  SKY12242-492LF are 50 or 100 W, integrated, high-power single-pole, double-throw (SPDT) switches. They are designed with a driver circuit that is ideal for TDD 2G/3G/4G LTE applications, as well as high-power switches for micro and macro-base stations, and active antenna arrays.

  10. SPDT 75 Ohm Switches For Set-Top Box And CATV Applications
    5/10/2016

    Skyworks introduces two new SPDT 75 Ohm switches designed for set-top box and DVR applications.  The SKY13547-490LF and SKY13548-385LF feature very low insertion loss, high power handling capabilities, ultra-high linearity, and meet the rigorous requirements of DOCSIS 3.0/3.1 applications.