Bird Slide

  1. Bird Diagnostic System (BDS)
    2/6/2017

    The Bird Diagnostic System (BDS) is a tool designed for measuring voltages and currents in complex RF applications such as processing silicon wafers, chamber-to-chamber matching, and waveform reconstruction. The system comprises a sensor that attaches in-situ in the RF feed line, a receiver designed to perform data conversion, and a calibrated data cable that connects the sensor and receiver.

  2. Channel Power Monitor
    6/11/2015

    The Channel Power Monitor is specifically designed to monitor up to 16 channels simultaneously within complex communication systems. It is meant to provide the user with continuous information on the health of each component, including radio performance, combiner loss, and antenna/feed line characteristics of the system.

  3. Spectrum Capture and Playback System: IQC5000B
    6/10/2013

    This system captures and replays RF and microwave signals in surveillance applications, operational exercises, and performance validation applications. It features dual channel capability, allowing users to record uplink and downlink transmissions, or record one channel in different locations for signal characteristic analysis.

  4. SiteHawk Analyzer: SK-4500-TC, SK-200-TC
    6/4/2015

    The SiteHawk Analyzer is capable of fast swept measurements with seven user-selectable trace capture options. The SK-4500-TC and SK-200-TC units are available for coverage over the 1-4500 MHz and 300 kHz-200 MHz frequency ranges, which can be set using either Start/Stop or Center/Span frequencies.