XP1000 17.0-24.0 GHz GaAs MMIC Power Amplifier
Mimix Broadband's two stage 17.0-24.0 GHz GaAs MMIC power amplifier is optimized for linear operation with a typical third order intercept point of +37.0 dBm. The device also includes Lange couplers to achieve good input/output return loss and an on-chip temperature compensated output power detector. This MMIC uses Mimix Broadband's 0.15 μm GaAs PHEMT device model technology, and is based upon electron beam lithography to ensure high repeatability and uniformity. The chip has surface passivation to protect and provide a rugged part with backside via holes and gold metallization to allow either a conductive epoxy or eutectic solder die attach process. This device is well suited for Millimeter-wave Point-to-Point Radio, LMDS, SATCOM and VSAT applications.
Features
- 17.0-24.0 GHz Frequency Range
- 18.0 dB Typical Small Signal Gain
- On-Chip Output Power Detector
- +37.0 dBm Typical Third Order Intercept Point (IP3)
- Operates at +5.5 VDC
- 3.50 mm X 2.50 mm Die Size
- 100% On-Wafer RF, DC and Output Power Testing
- 100% Visual Inspection to MIL-STD-883 Method 2010
Click here to download the complete XP1000 datasheet in pdf format.
Absolute Maximum Ratings
Supply Voltage (Vd) | +5.6 VDC |
Supply Current (Id) | 650 mA |
Gate Bias Voltage (Vg) | +0.3 VDC |
Input Power (Pin) | +10.0 dBm |
Storage Temperature (Tstg) | -65 to +165 ºC |
Operating Temperature (Ta) | -55 to +75 ºC |
Channel Temperature (Tch) | 125 ºC |
Thermal Resistance (θjc) | 35 ºC/W |
Electrical Characteristics (Ambient Temperature T = 25 ºC)
Parameter | Units | Min. | Typ. | Max. |
Frequency Range (f) | GHz | 17.0 | - | 24.0 |
Input Return Loss (S11) | dB | 15.0 | 18.0 | - |
Output Return Loss (S22) | dB | 15.0 | 18.0 | - |
Small Signal Gain (S21) | dB | 16.0 | 17.5 | - |
Gain Flatness (ΔS21) | dB | - | +/-2.0 | - |
Reverse Isolation (S12) | dB | - | 40.0 | - |
Output Power for 1 dB Compression (P1dB) | dBm | - | +23.0 | - |
Output Third Order Intercept Point (IP3)* | dBm | +35.0 | +37.0 | - |
Drain Bias Voltage (Vd1,2,3,4) (Vd5 [Det], Rd=3–5KΩ) | VDC | - | +5.5 | +5.6 |
Gate Bias Voltage (Vg1,2,3,4) | VDC | -1.0 | -0.3 | +0.3 |
Supply Current (Id) (Vd=5.5V, Vg=-0.3V Typical) | mA | - | 430 | 650 |
Detector (diff) Output at 20 dBm** | VDC | 0.21 | 0.28 | 0.35 |
** Measured with either VdS=1.0V, or VdS=5.5V and Rd=5.6KΩ.