Two-Way RF Splitter/Combiner

Pulse, A Technitrol Company, Magnetic Componentsis a next-generation RF splitter/combiner to support interactive broadband cable communications. As a splitter, Pulse, A Technitrol Company, Magnetic Componentsis used to divide one RF signal into two matched outputs, or as a combiner, two signals are joined into a single output. Both ways, Pulse, A Technitrol Company, Magnetic Componentsprovides minimal signal loss while maintaining high signal isolation across a 5-1,000 MHz bandwidth.

Pulse, A Technitrol Company, Magnetic Componentshas a voltage standing wave ratio (VSWR) of 1.1:1 over the full frequency range and good isolation (30 dB typical to 400 MHz, 21 dB typical to 1000 MHz). Its size, 0.310 x 0.255 inch (7.87 x 6.48 mm), ceramic base, cover for pick-and-place compatibility and capacity to withstand the 235(degree) C peak temperature during IR solder reflow make Pulse, A Technitrol Company, Magnetic Componentssuitable for manufacturers of compact, high performance cable products.

Available in tube or tape-and-reel packaging, Pulse, A Technitrol Company, Magnetic Componentsis priced from $3.90 in quantities of 10,000. Higher volume discounts are available.

<%=company%>, 12220 World Trade Drive, San Diego, CA 92128. Phone: 858-674-8100; Fax: 858-674-8262.