Back Channel presents the most captivating news and innovations in RF and microwaves. This week, we explore a couple of markets, congratulate an NSF CAREER award winner, and more.
As EV adoption for both consumer and commercial purposes rapidly grows, so does the need for improved charging infrastructure. Currently, wireless charging is the newest EV charging technology evolving.
For performing L- and S-band pulsed radar testing at 600 V/m, AR RF/microwave instrumentation offers the 700S1G4 amplifier and the ATH800M5GA antenna have been proven to provide the necessary field levels under the required EMC test configurations.
Skyworks Solutions, Inc. is introducing an isolated gate driver reference design that operates with Wolfspeed’s silicon carbide (SiC) field effect transistor (FET) power modules.
The WaveFarer Radar Simulation Software uses ray-tracing to simulate virtual drive scenarios and predict radar returns as a system moves through an environment with vehicles, roadway structures, pedestrians, and other objects.
KRYTAR, Inc. offers RF/microwave engineers Model 7030400, a four-way power divider offering high performance over the ultra-broadband frequency range of 3.0 to 40.0 GHz in a compact package.
Pulsed signals are used in various applications, such as radar and wireless communications. The Boonton RTP5000 Series and Boonton Power Analyzer together can provide 16 automated pulse measurements.
This resource will help you avoid the most common mistakes and outlines the important things to consider to successfully develop or refine an automotive EMC chamber and test design.
Find out why one of the world's leading technology companies for development, simulation and testing in the automotive industry trusts the R&S radar test system for Vehicle-in-the-Loop ADAS testing.
This video demonstrates the operation of Analog Devices’ Automotive 76-81 GHz Radar Technology Platform. This platform will transform the way OEMs think about future advanced driver assistance systems (ADAS) and autonomous driving sensors.
The QPF1003Q is an integrated front-end module (FEM) designed for multi-standard systems such as C-V2X, DSRC/11p, and Wi-Fi. The QPF1003Q integrates a 5 GHz power amplifier (PA), TX/RX antenna switch, and bypassable low noise amplifier (LNA) into a single device. The compact form factor and integrated matching ideally minimizes layout area in automotive applications.
JFW's 50MS-426 is a 50-ohm non-blocking matrix switch operating 350-6,000 MHz. The switch can be remotely controlled via Ethernet or RS-232 connection, and the IP settings can be manually set via the front panel display.
HUBER+SUHNER offers the SENCITY Occhio MIMO DAS (distributed antenna system) designed for 5G coverage in a small form factor thanks to its multiband capability between 1.7 - 6 GHz with 2x2/4x4 MIMO configurations. Features include a smart connect-system with a self-locking adaptor and a quick-locking mechanism.
The AMP2103P-LC solid state high-power amplifier is designed for EMI/RFI, lab, CW/pulse and all communication applications and features instantaneous ultra-wide bandwidth and built-in protection circuits, with extensive monitoring.
