Newsletter | April 6, 2021

04.06.21 -- Spotlight On Test & Measurement | Design With EMI In Mind

Spotlight On Test & Measurement
Top Research Lab Solves Measurement Challenge In Hours Despite Tight Security

A leading research and development laboratory that supplies safety products to government agencies needed to make wafer level measurements on its semiconductor device to keep its project on track. It applied breakthrough science to solve tough engineering challenges and make state-of the-art products.

Amplifier Selection Tips For EMC Applications

When choosing an amplifier for EMC testing, there are various factors to consider. These factors can include technology, class of operation, good linearity and low harmonic distortion, modulation performance, multiple signal/tone applications, and more. 

EMI Troubleshooting With The Latest-Generation Oscilloscopes

This application note describes techniques that may be used to determine the source of unwanted emissions, especially after an out-of-limits condition has been identified through formal testing or pre-compliance testing.

Understanding Pulsed Phase Noise Measurements

This application note focuses on phase noise measurements for pulsed RF carriers. The paper addresses some of the physical limitations relating to pulsed phase noise measurement and introduces the capabilities of the new Rohde & Schwarz FSWP phase noise analyzer.

Introduction To RNVNA, A Multiport Network Analysis Solution
The RNVNA, a multiport network analysis solution, links up to 16 1-port analyzers together into a multiport network analysis system. Each of the 16 analyzers will make individual vector reflection measurements and scalar transmission measurements from port to port.
On-Wafer Biasing Using Kelvin Bias Tees

The VectorStar ME7838x series of broadband systems covers a range of 70 kHz to 110/125/145/220 GHz. The distinctive architecture of the Anritsu NLTL mmWave modules offers a DC path between the baseband VNA and the DUT through the module.

Using Signal Hound’s Spike Software For EMC Precompliance Radiated Emissions Testing

When conducting an EMC test, many detailed and specific tools, environments, processes, and procedures need to be put in place. The Signal Hound BB60C USB-powered Spectrum/Signal Analyzer and Spike Software accurately carry out flexible EMC precompliance measurements.

Most Popular News
Featured Multimedia
Introducing Skyworks’ Broadband Low-Noise Amplifiers

The SKY67183-396LF and SKY67189-396LF models are broadband low-noise amplifiers designed for upcoming 5G network requirements. With features such as superior gain flatness, exceptional linearity, and an internal active bias circuitry, these LNAs offer the ability to externally adjust supply current and provide stable performance over temperature and process variation.

Bulletin Board
Design With EMI In Mind: Test Early, Test Often

Learn about Rohde & Schwarz's solutions for EMI testing. This poster includes everything from prototyping and EMI debugging to design considerations. Also included is a design checklist, complete with a breakdown of products available.

Featured Products And Services
S/C-Band 2-8 GHz 2.0 kW Compact Pulsed Amplifier: VZS/C3529J1

The VZS/C3529J1 is an ultra-wideband, automatic fault recycle, compact pulse amplifier designed for 230 VAC operation that meets International Safety Standard EN61010 and Electromagnetic Compatibility 2004/108/EC in test and measurement applications.

Request Information
Communications & Power Industries
Field Probes And Field Monitoring: FL8000 And MP Series

The FL8000 and MP Series by AR for field monitoring and probes offers a three-in-one solution used for measuring continuous-wave, pulsed, and modulated electric fields. Applications for the FL8000 Series include commercial, automotive, military, and aviation. This series offers exceptional linearity and dynamic range performance, enabling the accuracy required for demanding testing. 

Request Information
RF Test Systems Up To 40 GHz

Through the integration of attenuators, switches, power dividers, and various other components, JFW systems are designed with the specific needs of your system in mind. JFW Test Systems also can receive RS-232/GPIB/Ethernet commands formatted to meet your specific control requirements.

Request Information
JFW Industries, Inc.
EMC/EMI Test And Measurement Solutions Brochure

The EM TEST company offers expertise in EMC and provides testing and measurement solutions for automotive, telecom, medical, industrial electronics, avionics, and military applications in full compliance with current requirements while remaining adaptable for future developments.

Request Information
Rack Mount Extended Frequency Remote Spectrum Analyzer: EVO-RSA-6070A

Avcom offers the new EVO-RSA-6070A as part of the EVO Series of rack mount analyzers. This extended frequency remote spectrum analyzer is designed to operate in the 70 MHz to 6 GHz frequency range. This SDR-style technology analyzer with a wide bandwidth receiver employs FPGA, DSP, and high-performance processors. 

Request Information
AVCOM Of Virginia Inc.
SAS-550-1B Battery Operated Active Monopole - 9 KHz - 60 MHz

The SAS-550-1B Active Monopole Antenna is an active, general-purpose, receive-only antenna that covers the 9 KHz - 60 MHz frequency range. It is ideal for instantaneous bandwidth scanning (without tuning) of electric fields in its frequency range and can drive any receiver with 50-ohm input impedance.

Request Information
A.H. Systems
400 To 6,000 MHz Broadband Low-Noise Amplifiers

The SKY67183-396LF and SKY67189-396LF are ultra-broadband low-noise amplifiers designed for FDD and TDD 4G LTE and 5G NR systems. With features such as superior gain flatness, exceptional linearity, and an internal active bias circuitry, these LNAs offer the ability to externally adjust supply current and provide stable performance over temperature and process variation.

Request Information
Skyworks Solutions, Inc.