Newsletter | February 9, 2021

02.09.21 -- Spotlight On mmWave Technology | IEC 61000-4-3:2020 Edition 4.0 Changes

 
Featured Article
Spotlight On Millimeter-Wave Technology
Unique Millimeter-Wave Designs And Customized Products For Satcom, Radar, EW, And ECM Systems

Systems operating in the Ka-band, Q-band, and other high frequency bands present more significant SWaP-C challenges than systems operating at lower frequencies, demanding more expertise from component designers.

RF To Millimeter-Wave Front-End Component Design Trends For 5G Communications

To accommodate complex RF front-end architectures, more densification and miniaturization is taking place with electronic systems implemented through innovations in system-in-package (SiP) design. 

Learn Which Waveguide Horns Are Right For Your Millimeter Waves

Waveguide horn antennas represent technology that is old but still invaluable, especially for sending and receiving signals well into the millimeter-wave frequency range.

Resources
Changes Introduced With IEC 61000-4-3:2020 Edition 4.0

IEC 61000-4-3:2020 Edition 4.0 was released in September 2020; it cancels and replaces Edition 3 published in 2006, including Amendment 1:2007 and Amendment 2:2010. The changes that were made in Edition 4.0 are outlined in this article.

Krytar Brochure

KRYTAR, Inc., founded in 1975, specializes in the design and manufacturing of high-performance, broadband microwave components and test equipment for both commercial and military applications. KRYTAR millimeter-wave products cover the 30 to 67 GHz frequency range.

Most Popular News
Featured Multimedia
5G Millimeter-Wave Frequencies And Mobile Networks Technology Presentation
 

Remcom contributed to an in-depth study, published by the IWPC, using Wireless InSite to analyze throughput in a complex urban scenario. These coverage results highlight potential obstacles and solutions for deployment of millimeter-wave for 5G.

Webinar - The New TCA: Solutions For Avionics Installations
 

In this webinar, Times Microwave Systems will discuss the challenges and requirements of airframe installations. From reduced inventory and FOD to time and cost-savings, customers around the world have tested and approved thousands of TCA assemblies.

Bulletin Board
Microwave And Beyond Poster
 

Rohde & Schwarz offers a variety of solutions for microwave test needs, including signal generators, spectrum and signal analyzers, network analyzers, power meters, oscilloscopes, and EMC test equipment. Download this poster for an overview on microwave signals, conversions, standards, and more.

Featured Products And Services
100-Watt Fixed Attenuator DC To 3 GHz With 2.25" Diameter: 50FHLB-XXX-100

Model 50FHLB-XXX-100 is a unidirectional, 100-Watt fixed attenuator that operates DC to 3 GHz. It has a heatsink that is only 2.25 inches in diameter. It is available with 50-Ohm coaxial RF connectors N, 4.3/10, or 7/16. It is currently available with attenuation values 10, 20, or 30 dB. There are mounting holes (8 to 32 threads) on both ends of the heatsink.

Request Information
JFW Industries, Inc.
Small Form Factor, 8-Channel RF A/D & D/A Subsystem: Model 6350S

The Model 6350S is a small form factor, 8-channel A/D and D/A subsystem designed for a variety of applications including high-bandwidth data streaming, waveform signal generators, multimode data acquisition, and other electronic warfare systems. Designed to be integrated into larger systems with minimal design effort, the 6350S delivers the performance and high-channel density of RFSoC in a small, convenient footprint.

Request Information
Pentek, Inc.
6.0 To 18.0 GHz CW Traveling Wave Tube
CPI offers a 6.0 to 18.0 GHz CW traveling wave tube (TWT) with power output from 20 to 100 W. It is ideally designed for use in fixed or mobile applications. Custom variations in performance and configuration include mechanical configurations, electrical and RF configurations, and dual-stage depressed collectors.
Request Information
Communications & Power Industries
Hybrid Microelectronics Packages

Founded in 1972, Mini-Systems, Inc., Electronic Package Division has been providing the electronics industry with the very highest quality hybrid microelectronic packages available. The Electronic Package Division is best known for supplying the hybrid alternative to plastic microelectronic packages; namely, our alumina/glass sidewall packages. These packages meet military and space-level quality requirements and exceed virtually all commercial needs.

Request Information
Mini-Systems, Inc.
18 To 40 GHz Millimeter-Wave Coupler: 765-10-29.000

MECA introduces the 765-10-29.000 5G millimeter-wave directional coupler for applications operating in the 18 to 40 GHz frequency range. Available with a coupling value of 10 dB, this coupler has an insertion loss of 1.3 dB and directivity of over 12 dB. It can handle an average power of up to 20 watts and has a VSWR of 1.80:1. The 765-10-29.000 is available in a module with 2.92 mm female connectors.

Request Information
MECA Electronics Inc.