Product/Service

R&S FSUP Signal Source Analyzer

Source: Rohde & Schwarz GmbH & Co. KG

R&S FSUP
The Signal Source Analyzer R&S FSUP offers the user a high-end spectrum analyzer (R&S FSU) up to a maximum frequency of 50 GHz, combined with a phase noise tester based on the PLL method. In addition, the R&S FSUP is equipped with two independent, very low-noise DC ports. Supply voltage and tuning voltage can be individually defined for each port via a clear-cut menu, which enables control of external oscillators or a complete characterization. Like an FM/PM/AM demodulator – the R&S FSUP records the oscillator signal over time. With the functionality of a phase noise tester, time domain and spectrum analyzer combined into a single device with a maximum input frequency of 50 GHz, the R&S FSUP is the optimum instrument for development and production.
Request Information

Click Here To Download:
Datasheet: Signal Source Analyzer R&S FSUP
Application Note: TraceRecorder Software Tool For Storing Trace Data
Application Note: Bluetooth® Basics At A Glance
Application Note: Additional Tests On CDMA2000 Mobile Stations In Accordance With Standard TIA-98
Application Note: RSCommander -- Versatile Software Tool For Rohde & Schwarz Instruments
Application Note: Remote Operation Of R&S Instruments Using Remote Desktop Connection Via LAN
Application Note: TD-SCDMA Test Signals In Accordance With Standards TS 34.122 And TS 25.142

Key Facts

  • Frequency range up to 8/26.5/50 GHz
  • Up to 110 GHz with external mixers
  • Maximum flexibility in phase noise measurements: Phase detector method, internal/external reference, Phase detector method with crosscorrelation, Spectrum analyzer method
  • Complete characterization of oscillators: Phase noise, Characteristics, Transient response, Harmonics
  • Fast and easy operation
  • Maximum sensitivity in phase noise measurements at 1 GHz input frequency (at 10 kHz offset –134 dBc (1 Hz); at 10 MHz offset –170 dBc (1 Hz))
  • Unrivaled dynamic range TOI typ. 25 dBm, DANL: –160 dBm

Features Phase Noise measurements with phase detector method up to frequency offset of 30 MHz

  • with internal reference source with external reference source
  • with two oscillators
  • optional two receiver paths enabling cross-correlation method (increase of sensitivity by up to 20 dB)

Direct measurement of phase noise with spectrum analyzer

Fully fledged spectrum analyzer

Phase Noise measurements with phase detector method up to frequency offset of 30 MHz

  • Tuning slope
  • Tuning sensitivity
  • RF power at different tuning voltages or DC voltages
  • Power of higher harmonics

Transient measurements on oscillators – settling times

Click Here To Download:
Datasheet: Signal Source Analyzer R&S FSUP
Application Note: TraceRecorder Software Tool For Storing Trace Data
Application Note: Bluetooth® Basics At A Glance
Application Note: Additional Tests On CDMA2000 Mobile Stations In Accordance With Standard TIA-98
Application Note: RSCommander -- Versatile Software Tool For Rohde & Schwarz Instruments
Application Note: Remote Operation Of R&S Instruments Using Remote Desktop Connection Via LAN
Application Note: TD-SCDMA Test Signals In Accordance With Standards TS 34.122 And TS 25.142

Need More Information? Just Ask.

Click the button below to directly contact the supplier. Use it to:

  • Ask a question.
  • Request more detailed information or literature.
  • Discuss your current project/application.
  • Request a quote.
  • Locate a distributor in your area.
  • Schedule a demo.
Request Information

Rohde & Schwarz GmbH & Co. KG