Newsletter | October 30, 2019

10.30.19 -- October's Most Popular Articles & News

 
Most Popular Articles
Design Of Rugged High Voltage Power Supplies For Use In Low Noise Multimode Radar Transmitter Sub-Systems
By Derek Newton, TMD Technologies

A radar transmitter is generally required to amplify a low noise coherent RF waveform. This paper covers an approach to the design of high voltage power supply units for operating traveling wave tube amplifiers in pulse doppler radar transmitter sub‐systems where ultra-low noise RF output is mandatory.

Extending The Range Of A Low Power UAV Radio
By NuWaves Engineering

Low-power UAV radio systems, though designed for short distance communications, can be an inexpensive and reliable means of communications over greater distances — especially when the application is small UAS platforms.

Electrical-To-Optical And Optical-To-Electrical (E/O And O/E) Converter Measurements
By Anritsu Company

As the need for high speed optical modulators and detectors increase, it is important to understand the frequency response characterization of electrical-to-optical (E/O) and optical-to-electrical (O/E) converters in terms of parameters such as bandwidth, flatness, phase linearity, and group delay. 

Contribute To RF Globalnet!

It is our goal to provide the industry's most intriguing content to our readers in each newsletter. To that end, RF Globalnet welcomes editorial contributions of all kinds, from white papers and application notes to guest columns and case studies, as well as news and article suggestions. If you have an idea to share, please review RF Globalnet's contributor guidelines and contact us. Thank you for reading, and we look forward to hearing what we can do to better serve you.

Connect With RF Globalnet:
      Twitter