IMS 2017 — AR Booth 1014

AR has an impressive array of product offerings that will be on display at IMS 2017.

More than 9 new solid state pulse amplifiers were recently added with 1 to 4 GHz frequency range and output powers up to 6000 watts. AR has also increased the power of their 0.7 to 6 GHz amps to 500 watts.

Visit AR’s booth to see redesigned 6 to 18 GHz solid state amplifiers with Class A, CW power levels to 40 watts.

Products from AR Modular and its newest division, SunAR RF Motion, will also be on display.

Featured Article
PNT: Going Beyond GPS
By Thomas Reed, Bliley Technologies

As powerful as GPS technology is, it has three key problems. To overcome these problems, new positioning, navigation, and timing (PNT) systems are being developed that can enhance the effectiveness of existing GPS and take advantage of alternatives to conventional GPS.

Bliley Technologies, Inc. | IMS Booth 425
Must See Products At IMS2017
0.7 To 6 GHz, Solid State Broadband Amplifier: Model 500S1G6

The Model 500S1G6 from AR is a solid state broadband amplifier that operates over the 0.7 to 6 GHz frequency range and is designed for applications where instantaneous bandwidth, high gain, and linearity are required. It is ideal for use as a driver amplifier in testing wireless and communication components and subsystems, and EMC testing applications.

Download Datasheet
Request Information
IMS Booth 1014
Dual-Channel Switch LNA Module: QPB9319

Qorvo offers the new QPB9319 highly integrated front end module with operation in the 1.8 to 4.2 GHz frequency range for TDD base station, wireless infrastructure, small cell BTS, and pre-5G/5G massive MIMO applications. This LNA module integrates a two-stage LNA and a high-power switch in a dual-channel configuration.

Download Datasheet
Request Information
IMS Booth 1510
High-Power RF Pin Diode Switches

Corry Micronics offers two new RF pin diode switches with operation in the 1 GHz to 1.1 GHz frequency range. The CMSW-SPDTR-1G-5K is a single-pole double-throw (SPDT) hermetically sealed reflective switch, while the CMTRSW-1G1R1G-2K5 is a high-power transmit/receive (T/R) switch designed to be used in IFF applications.

Download Datasheet
Request Information
Corry Micronics, Inc.
IMS Booth 704
YIG Frequency Synthesizer

Teledyne Microwave Solutions (TMS) has developed a brand new line of YIG synthesizers that substantially reduces the high cost of acquiring a high-quality, broadband low-phase noise source. After many years of building YIG oscillators, TMS has applied that expertise to deliver a 'Win-Win': low phase noise and low cost in a plug and play synthesizer solution.

Download Datasheet
Request Information
Teledyne Microwave Solutions
IMS Booth 1502
1 KW, L-Band Radar Pallet Amplifier: IGNP1214M1KW-GPS

Integra Technologies presents the IGNP1214M1KW-GPS, a single-supply, 50 Ω matched GaN-based pulsed power pallet amplifier for L-band radar applications.

Download Datasheet
Request Information
Integra Technologies, Inc.
IMS Booth 902
Spotlight On IMS2017
IMS2017 International Microwave Symposium

June 4 to 9, 2017 | Honolulu, Hawai'i

IMS2017 is the largest international conference devoted to the research, development, and application of RF and microwave theory and techniques, and is expected to draw over 8,000 participants and 500 exhibiting companies from around the world. This is the 60th year that MTT-S has organized this symposium, and only the second time that it is being held off of the North American continent — the first time being 2007 when it was also held in Hawai‘i. Hawai‘i has long been regarded as the Crossroads of the Pacific, making it the perfect venue to bridge East and West by encouraging attendees and exhibitors alike to interact in a global microwave village.

Microwave Products For EW Radar Applications

CPI Beverly Microwave Division provides the industry-proven design techniques and engineering expertise to meet the rigid and dependable standards of electronic warfare products.

CPI Beverly Microwave Division | IMS Booth 938
DLI's Evolution To 5G Passive RF Components

With a catalog of products offering a wide array of filters, power dividers, and directional couplers, Knowles Capacitors is evolving their business to make their products the ideal solution for 5G base stations and many other RF and microwave applications.

Dielectric Laboratories (DLI) | IMS Booth 630
SMP Snap-On Connectors For Applications Up To 40 GHz

The HUBER+SUHNER SMP snap-on connector solutions are ideal for applications from DC to 40 GHz in T&M, IND, and COMM markets. Each solution is compatible with all MIL-STD-348 SMP connectors due to the interface design and the treatment of materials used.

Bulletin Board
IMS 2017 Preview: Capturing Diffuse Scattering Effects In 5G mmWave Channels

Attend one of Remcom's daily presentations on Wireless InSite's diffuse scattering capabilities, 5G channel modeling, and more at IMS 2017.

Remcom | IMS Booth 1248
More Products To See At IMS2017
6.2, 12.5, Or 20 GHz Signal Generator With 8 Independent Outputs
Download Datasheet
Request Information
Berkeley Nucleonics Corporation
IMS Booth 955
0.5 To 20 GHz Broadband Directional Coupler
Download Spec Sheet
Request Information
IMS Booth 525
SO-8 Hermetic Package DC To 20 GHz
Download Datasheet
Request Information
Mini-Systems, Inc.
IMS Booth 1835

80 To 100 GHz HEMT SPDT Switch
Download Datasheet
Request Information
Northrop Grumman Microelectronic Products & Services
IMS Booth 932
Power Supply Series: R&S NGE100
Download Brochure
Request Information
Rohde & Schwarz GmbH & Co. KG
IMS Booth 1348
27 To 31 GHz, 8 W GaN Power Amplifier: AHP-29043925-G1
Download Datasheet
Request Information
Ducommun Inc.
IMS Booth 1819
Connect With RF Globalnet: