05.03.22 -- NEW -- Don't Miss Our Favorite Products For May

The SGX1000 series of RF signal generators offers high-performance signal generation with an easy-to-use interface in a compact form factor. The SGX1000 utilizes a proprietary blend of direct digital and direct analog synthesis to provide ultra-fine frequency resolution, lightning-fast frequency switching, ultra-low phase noise and jitter, and superior reliability.

The NuWaves NuPower 11B02A-TAC2 is a fully integrated, miniature solid-state power amplifier that provides ultra-wideband operation across multiple octaves from high VHF through S-band frequencies, and typically delivers 10 watts of RF power across the frequency range of 200 MHz to 2.6 GHz.

The SCFE6931 leverages Versal™ ACAP (Adaptive Compute Acceleration Platform) technology from Xilinx® to create an FPGA processing board that operates up to 20x faster than former FPGA implementations. 

Wireless InSite is a suite of ray-tracing models and high-fidelity EM solvers for the analysis of site-specific radio wave propagation and wireless communication systems. The RF propagation software provides efficient and accurate predictions of EM propagation and communication channel characteristics in complex urban, indoor, rural, and mixed path environments.

AR Modular RF has designed a series of wideband, class A/AB linear amplifier platforms for use with modern digital modulations. This AR-5000 amplifier has a flexible system architecture, which allows for rapid prototyping and quick-turn modifications as customer needs arise.

The SAS-563P is a 12” passive shielded loop antenna and is an excellent solution for shielding effectiveness testing. The electrostatic shielded loop antenna is typically used for shielding effectiveness testing per IEEE 299, MIL-STD 285, and NSA 65-6, as well as many other test standards. This passive loop antenna is shielded against the electric component by enclosing the conducting loop within an all-metal shield.

The R&S®FSPN phase noise analyzer and VCO tester is designed to provide both very high sensitivity and measurement speed for production and design engineers working in these fields characterizing sources such as synthesizers, VCOs, OCXOs, and DROs. It is the ideal instrument for demanding development and production phase noise and VCO analysis.

JFW's 50MS-426 is a 50-ohm non-blocking matrix switch operating from 350-6,000 MHz. The switch can be remotely controlled via Ethernet or RS-232 connection, and the IP settings can be manually set via the front panel display.

The Model 750S1G6C is a solid-state, Class A design, self-contained, air-cooled, broadband power amplifier designed for applications where instantaneous bandwidth, high gain, and linearity are required. 

Knowles Precision Devices (DLI) offers filter technology that addresses the challenge of implementing high-performance filters at mmWave frequencies. Their 26 GHz, 28 GHz, and 39 GHz filter solutions deliver 3 GHz of bandwidth, provide greater than 50 dB rejection, and are 20x smaller than current alternatives while implemented in surface mount packages for standard tune-free assembly. They are capable of stable operation within the -55°C to 125°C temperature range. Custom design services are available.

The ADMV8526 is an RF band-pass filter that features a digitally selectable frequency of operation. The filter center frequency (f_CENTER) can be adjusted from 1.25 GHz to 2.60 GHz using an 8-bit value (256 states) that incorporates a patent pending interpolation technique.

The SKY58211 Envelope Tracking Front-End Module (FEM) is a multimode multiband (MMMB) module with integrated low noise amplifiers (LNAs), which supports 2.5G / 3G / 4G / 5G and CDMA handsets and operates efficiently in WCDMA, HSPA, and LTE modes. 

The Krytar Model 526550010 dual-directional coupler covers the 26.5 to 50 GHz frequency range and is ideal for use in power sampling and measurement, amplifier leveling, VSWR monitoring, field control, and amplifier and load protection. The new directional coupler lends itself to wireless designs and many test and measurement applications for the emerging mmWave and 5G markets.

The QPD1028 is a 750 W discrete GaN on SiC HEMT that operates from 1.2 to 1.4 GHz, providing typically 59 dBm of saturated output power with 18 dB of large-signal gain and 70% of drain efficiency.

CPI offers the VKS-8262 series of klystrons for use in particle accelerators for scientific, medical, and industrial applications. These klystrons provide up to 7.5 MW peak at 2.856 or 2.9985 GHz at various RF pulse lengths and duty.