Product/Service

Model 20S6G18: 20 Watts CW, 6 GHz To 18 GHz Solid-State Amplifier

Source: AR

5S10G20NEW
The Model 20S6G18 is a portable, self-contained, air-cooled, broadband, completely solid-state amplifier designed for applications where instantaneous bandwidth, high gain and linearity are required. The Model 20S6G18, when used with a sweep generator, will provide a minimum of 20 watts of RF power instantaneously from 8 to 20 GHz. The 20 watt model can be expanded to 40 watts inside the same cabinet.
Request Information

Click Here To Download:
Datasheet: Model 20S6G18: 20 Watts CW, 6 GHz To 18 GHz Solid-State Amplifier

The Model 20S6G18 is a portable, self-contained, air-cooled, broadband, completely solid-state amplifier designed for applications where instantaneous bandwidth, high gain and linearity are required. The Model 20S6G18, when used with a sweep generator, will provide a minimum of 20 watts of RF power instantaneously from 8 to 20 GHz. The 20 watt model can be expanded to 40 watts inside the same cabinet.

The Model 20S6G18 is equipped with a Digital Control Panel (DCP) which provides both local and remote control of the amplifier. The DCP uses a graphic Liquid Crystal Display, menu assigned softkeys, a single rotary knob, and a dedicated power on/off switch to offer extensive control and status reporting capability. The display provides operational presentation of Forward Power and Reflected Power plus control status and reports of internal amplifier status. Special features include a gain control, internal/external automatic level control (ALC) with front panel control of the ALC threshold, pulse input capability and RF output level protection. Also included is an internal RF detector which provides an output for use in self-testing or operational modes.

All amplifier control functions and status indications are available remotely in GPIB/IEEE-488 format, RS-232 hardwire and fiber optic, USB, and Ethernet. The buss interface connector is located on the back panel and positive control of local or remote operation is assured by a keylock on the front panel of the amplifier.

The Model 20S6G18 is designed to have low spurious signals, linearity and is extremely load tolerant which enables it to be used in many RF applications such as: RF susceptibility testing, antenna/component testing, and communication technology testing. It can be used as a test instrument covering multiple frequency bands and is suitable for a variety of communication technologies such as CDMA, W-CDMA, TDMA, GSM, UWB, WiMAX etc.

Click Here To Download:
Datasheet: Model 20S6G18: 20 Watts CW, 6 GHz To 18 GHz Solid-State Amplifier

Need More Information? Just Ask.

Click the button below to directly contact the supplier. Use it to:

  • Ask a question.
  • Request more detailed information or literature.
  • Discuss your current project/application.
  • Request a quote.
  • Locate a distributor in your area.
  • Schedule a demo.
Request Information