Newsletter | March 1, 2022

03.01.22 -- March Product Showcase: OCXO | HBM Board Solutions

 
Editor's Choice
High-Frequency, Low Phase Noise, And Low G-Sensitivity OCXO: XO9095

The XO9095 is an OCXO integrated with low noise multipliers, filters for superior spectral purity and low noise discrete amplifiers to generate a high-frequency, low phase noise sinewave output from 200 MHz to 6 GHz. The XO9095 employs an in-house manufactured precision SC-cut crystal, which drives the tight stability, low g-sensitivity, and low phase noise performance of the OCXO.

Request Information
MtronPTI
Readers' Choice
35 Watts PEP, 30 - 512 MHz, Tx/Rx Booster Amplifier: AR-35

The Model AR-35 is a portable, lightweight, waterproof, fully automatic band-switching RF booster amplifier for multi-band VHF/UHF tactical radio equipment employing legacy, proprietary, and emerging waveforms. The amplifier covers the frequency band of 30 - 512 MHz using six high-speed auto switching filters to assure harmonic suppression and is SINCGARS and HAVEQUICK compatible.

Request Information
AR Modular RF
Featured Products And Services
HBM Board Solutions Optimized For SWaP

The Xilinx Virtex UltraScale+ on-chip high-bandwidth memory (HBM), coupled with the FPGA’s logic and DSP density, enables the Models 5585 and 5586 to be single-slot 3U VPX processing powerhouses. All have a SOSA-aligned 3U profile for proven rapid technology insertion and risk reduction.

Request Information
Mercury Systems, Inc.
Broadband Power Amplifier: 250S1G6C

The Model 250S1G6C is a solid-state, Class A design, self-contained, air-cooled, broadband power amplifier designed for applications where instantaneous bandwidth, high gain, and linearity are required. 

Request Information
AR
Passive Loop Antenna: SAS-565H

The easiest method to avoid antenna saturation for the measurement of high magnetic fields is to use a passive antenna. This passive loop antenna is designed with a balanced faraday shield for magnetic field emissions and immunity type measurements. 

Request Information
A.H. Systems
AR-50 And AR-75 Military Booster Amplifiers

The AR-50 and AR-75 are robust booster amplifiers designed and targeted for the harshest defense and military environments.

Request Information
AR Modular RF
X-Band RF Transmitter: VSX3717

CPI’s VSX3717 is an air or liquid cooled 4.0 kW X-band solid state power amplifier optimized for pulse radars. This amplifier utilizes GaN transistors to provide high gain, high efficiency, and excellent pulse fidelity. The result is excellent AM/PM, phase noise, and spectral regrowth performance.

Request Information
Communications & Power Industries
Directional Coupler: 110050030

KRYTAR’s directional couplers are uniquely designed for systems applications where external leveling, precise monitoring, signal mixing, or swept transmission and reflection measurements are required. KRYTAR’s latest addition, Model 110050030, enhances the selection of multipurpose stripline designs that exhibit excellent coupling over an ultra-broadband frequency range of 10.0 to 50.0 GHz in a single compact and lightweight package.

Request Information
Krytar
High Gain, Dual CH, LNA+SW Module (3.3 To 4.0 GHz 20W): ADRF5515A

The ADRF5515A is a dual-channel, integrated RF, front-end, multichip module designed for time division duplexing (TDD) applications. The device operates from 3.3 GHz to 4.0 GHz. The ADRF5515A is configured in dual channels with a cascading two-stage low noise amplifier (LNA) and a high-power silicon single pole, double-throw (SPDT) switch.

Request Information
Analog Devices
Integrated Stabilized RF Source: dB-9005

The dB-9005 from dB Control is a custom-mounted Integrated Stabilized RF Source (ISRFS) designed to operate in the I- and Ka-band frequency range. This product features high accuracy and a wide temperature operating range and can be controlled and set up with a digital port. The units are packaged in a custom configuration with conduction cooling.

Request Information
dB Control
Hiteca Stable Low Loss Capacitor

Through Knowles' unique, patented dielectric system, Hiteca MLCCs are able to achieve a capacitance aging rate of 0% per decade and a typical capacitance reduction of <45% at full rated voltage. 

Request Information
Knowles Precision Devices DLI
20 – 5,000 MHz 1P8T RF Switch For Economical Automated RF Testing: 50S-2133 SMA

The 50S-2133 SMA from JFW is a solid-state, self-terminating 1P8T RF switch designed for economical automated RF testing applications in the 20 – 5,000 MHz frequency range.

Request Information
JFW Industries, Inc.
Low Loss GPS SAW Filters: QPQ1060, QPQ1061, QPQ1062

The QPQ106* series are GPS band pass filters in a compact size for use in any GPS application. Designed for rejection of unwanted GPS signals, these SAW filters also have excellent power handling capability for low-power transmitters.

Request Information
Qorvo
XFdtd Superposition For Advanced Phased Array Design

XF leverages the EM principle of superposition to quickly analyze port phase combinations with a single simulation.

Request Information
Remcom
Aerial Monitoring System: R&S AMS

Whether you are monitoring your airspace for 5G C-band interference or checking your microwave links, the R&S AMS aerial monitoring system is a payload for drones that provides monitoring and analysis capabilities for VHF/UHF/SHF transmissions that are difficult to measure from the ground. Elevate your RF interference measurements to the location that matters.

Request Information
Rohde & Schwarz GmbH & Co. KG
Mini-SMT RSMT Series SMT Resistors

Mini-SMT thin film resistors offer maximum benefits in ohmic value ranges from .5 Ω through 500 MΩ. It has T.C.R.s to ±5 ppm/°C - and absolute tolerances to 0.05%. Available in 0505, 0805, and 1206 sizes, these resistors provide proven thin film performance in a surface mount solderable style.

Request Information
Mini-Systems, Inc.
Very Low Distortion Attenuator Plastic Packaged PIN Diodes: SMP1307 Series

Skyworks offers the SMP1307 Series of plastic packaged, surface mountable, low capacitance silicon PIN diodes designed for attenuator applications operating from 5 MHz to beyond 2 GHz. With a thick 175 μm I region width, these PIN diodes are ideal for use in very low distortion Pi and TEE attenuators commonly found in TV distribution applications.

Request Information
Skyworks Solutions, Inc.