Newsletter | June 1, 2021

06.01.21 -- Implantable Capacitors | RF Sources & Receivers | Passive Loop Antenna

 
Editor's Choice
Voltage-Controlled RF Phase Shifter: CMIVCPS01000200A

The CMIVCPS01000200A from Corry Micronics is a 4 to 8 GHz voltage-control phase shifter. These accurate phase control shifters feature up to 20 GHz and 100s of watts with several capabilities.

Request Information
Corry Micronics, Inc.
Readers' Choice
Full Wave Matching Circuit Optimization In XFdtd

Determining the final set of component values in a matching network can be a challenging process. Traditionally, RF engineers have had to simplify and idealize their matching circuits in schematics that are separated from the EM simulation. This simplification into a lumped element schematic requires perfect grounds and leaves out the coupling and transmission line effects of the interconnect metal and the antennas.

Request Information
Remcom, Inc.
Featured Products And Services
Advanced LCP Substrates For HF And Microwave Applications

Liquid crystal polymer (LCP) is a superior organic multilayer material for substrates in RF applications with stable electrical and mechanical characteristics across a range of frequencies up to 100 GHz. Due to its very low water absorption, LCP properties remain nearly constant regardless of the presence of moisture, allowing its use for near-hermetic packages.

Request Information
Micro Systems Technologies
1200 Watt CW, 10 kHz - 225 MHz Solid-State Broadband Amplifier: 1200A225A

AR’s 1200A225A is a solid-sate amplifier covering the 10 kHz – 225 MHz frequency range. When used with a sweep generator, it provides a minimum of 1200 watts of RF power. Like most of AR’s amplifiers, this model is ideal for applications that call for instantaneous bandwidth and high gain.

Request Information
AR
Prove Field Worthiness Of EW Systems With RF Sources And Receivers

Radar simulation systems (i.e., RF sources and/or receivers) must perform to an exacting minimum standard if they are to accurately prove the field worthiness of EW systems.

Request Information
dB Control
Passive Loop Antenna: SAS-565H

The easiest method to avoid antenna saturation for the measurement of high magnetic fields is to use a passive antenna. This passive loop antenna is designed with a balanced faraday shield for magnetic field emissions and immunity type measurements. 

Request Information
A.H. Systems
Capacitors For Medical Implantable Devices

As the global life expectancy continues to get longer, the demand for electronic medical implantable devices is growing. Knowles offers a variety of capacitor solutions for the medical implant industry.

Request Information
Knowles Precision Devices DLI
6 To 40 GHz Directional Coupler: Model 106040020

Krytar offers the new Model 106040020 directional coupler designed for system applications where external leveling, precise monitoring, signal mixing, or swept transmission and reflection measurements are required. The coupler features a multipurpose, stripline design with excellent coupling over the 6 to 40 GHz frequency range.

Request Information
Krytar
DC To 20 GHz SO-8 Hermetic Package
This hermetic SO-8 package from MSI is designed for hi-rel, microwave radio, military, and space applications requiring enhanced reliability performance. The package is fully hermetic and operates from DC to 20 GHz. The package body and outline dimensions are compatible with JEDEC Standards MS-012-AA.
Request Information
Mini-Systems, Inc.
Mesa Beam-Lead PIN Diode: DSM8100-000

The DSM8100-000 silicon mesa beam-lead PIN diode from Skyworks is designed for low resistance, low capacitance, and fast switching time in a variety of switching applications. It is surrounded by a glass frame for superior strength and electrical performance that surpasses the standard beam-lead PINs.

Request Information
Skyworks Solutions, Inc.
Solid State Power Amplifiers

CPI offers a comprehensive line of solid state GaN power amplifiers optimized for operation within the L-band, S-band, and X-band. These amplifiers provide high gain, high efficiency, and excellent stability, with excellent AM/PM and phase-noise performance.

Request Information
Communications & Power Industries
Hybrid Band Pass Band Reject Diplexers

Corry Micronics offers a series of hybrid band pass band reject diplexers operating at input frequencies from 2 to 8 GHz and 1 Watt power.

Request Information
Corry Micronics, Inc.
Model AR-5010 Amplifier

AR Modular RF’s AR-5000 Series is the next generation of wideband, Class A/AB linear amplifier designed for use with modern digital modulations. Engineered with a flexible system architecture, AR-5000 Series amplifiers are tailored to meet specific user needs over the frequency range of 80 kHz to 1000 MHz and power range of up to 1000 Watts CW and 4000 Watts peak.

Request Information
AR Modular RF
Low-Noise Amplifier (0.01 GHz To 10 GHz): HMC8411

Analog Devices' HMC8411 is a LNA that supports defense and aerospace applications. Housed in a RoHS-compliant, 2 mm × 2 mm, 6-lead LFCSP, this product provides a typical gain of 15.5 dB, a 1.7 dB typical noise figure, and a typical output third-order intercept (OIP3) of 34 dBm, requiring only 55 mA from a 5 V supply voltage. 

Request Information
Analog Devices
75-Ohm Electro-Mechanical RF Switches

JFW offers a full line of 75-Ohm electro-mechanical RF switches. They are ideal for cable TV and VSAT testing applications. All models cover a frequency range of DC to 2150 MHz, are self-terminating, and come standard with F female connectors (75-Ohm BNC and N also available).

Request Information
JFW Industries, Inc.
100-Gigabit Ethernet Recorder For Pentek's Quartz RFSoC: Talon RTR 2757
The Talon RTR 2757 is a turnkey system designed for recording 200-Gigabit Ethernet UDP streams. It is designed to capture digitized data from four of these streams in real time at the full 100-Gigabit per second rate. With up to 122 TB of removable solid state storage, the RTR 2757 provides hours of multichannel wideband signal recording.
Request Information
Pentek, Inc.
2.4+, 5 To 7 GHz edgeBoost BAWplexer: QPQ2456
The QPQ2456 from Qorvo is a high-performance, high-power BAWplexer. This product takes advantage of Qorvo's edgeBoost technologies, which deliver extremely steep skirts while simultaneously exhibiting low loss in the Wi-Fi bands and high near-in rejection.
Request Information
Qorvo
Customized EMC Test System Solutions

Rohde & Schwarz provides a range of customizable EMC test systems that deliver turnkey automated execution of EMC measurements to meet demanding requirements. As an industry leader for EMI test receivers and broadband amplifiers, Rohde & Schwarz has all the core components required to assemble a complete system.

Request Information
Rohde & Schwarz GmbH & Co. KG