01.04.22 -- Front End Module | Phase Noise Analyzer | Amplifiers

Knowles' latest enhanced range of safety certified capacitors complies with international UL/cUL and IEC/EN specifications to offer designers the option of using a surface mount ceramic multilayer capacitor to replace leaded film types.

Radar simulation systems must accurately prove whether an electronic warfare (EW) system is ready to perform reliably in the field. This can be challenging for EW system engineers, and some choose to use a synthesizer.

This passive loop antenna from A.H. Systems is designed with a balanced Faraday shield for magnetic field emissions and immunity type measurements. The loop antenna’s electrostatic shield minimizes the E-field response for a more accurate magnetic field measurement.

The FK-AR-50 is an optional accessory for the AR-50 amplifier. It is designed to keep the amplifier cool to support demanding communication needs in applications requiring more data throughput and higher transmit duty cycles, or when operating in hot environments.

Corry Micronics offers a 1×256 blocking RF switch matrix designed to provide automatic routing and RF microwave signal conditioning between test equipment and the unit under test (UUT) in an RF/microwave ATE system. 1×256 blocking RF switch matrices are ideal for applications that involve the testing and measurement of multiple RF components.

MSI’s MSMW series is a thin film microwave chip resistor manufactured using specialized laser trimming for optimal performance over operating frequency ranges of DC to 20 GHz. Standard case sizes start at 0201.

Visit us at IMAPS Booth 613.

The NuPower Xtender LS10S01-D30 is a small, lightweight, and power-efficient bidirectional amplifier ideal for extending the communication range of half-duplex L- or S-band transceivers running constant-envelope or near-constant-envelope waveforms.

The Talon RTR 2628 recorder provides eight channels of phase-coherent RF signal recording, ideal for phased-array antenna systems. It is tunable up to 6 GHz and provides up to 80 MHz of real-time capture bandwidth.

Electrostatic discharge testing is utilized worldwide by electronics manufacturers to determine the ESD susceptibility of their devices. Given the high cost in time and materials associated with ESD hardware testing, the ability to simulate the ESD testing process in XFdtd is extremely valuable, allowing engineers to pinpoint locations susceptible to ESD damage and optimize ESD mitigation during the concept and design stage of product development.

The R&S®FSPN phase noise analyzer and VCO tester is designed to provide both very high sensitivity and measurement speed for production and design engineers working in these fields characterizing sources such as synthesizers, VCOs, OCXOs, and DROs. It is the ideal instrument for demanding development and production phase noise and VCO analysis.

The Si4694 DRM30 digital radio coprocessor provides significant advances in size, power consumption, and performance to enable DRM30 radio reception in automotive infotainment systems and car radios. It is designed to work with the high-performance automotive Si479xx family of radio tuners.

The HMC8413 is a gallium arsenide (GaAs) monolithic microwave integrated circuit (MMIC), pseudomorphic high electron mobility transistor (pHEMT), low noise wideband amplifier that operates from 0.01 GHz to 9 GHz.

The Model 750S1G6C is a solid-state, Class A design, self-contained, air-cooled, broadband power amplifier designed for applications where instantaneous bandwidth, high gain, and linearity are required.