Newsletter | January 5, 2021

01.05.21 -- EMI Filters And Capacitors | 3-Axis Antenna Positioner | Thick Film Jumpers

Editor's Choice
Three-Axis Antenna Positioner: 7.3AE3BP-7.3m

The Orbital Systems 7.3AE3BP-7.3m antenna positioner is designed and built to provide high reliability while withstanding severe environmental conditions. This 7.3AE3BP-7.3m three-axis satellite tracking system features a 7-degree tilt axis that is suitable for operation at X-band and below.

Request Information
Communications & Power Industries
Readers' Choice
MIMO And Array Design For 5G

XFdtd and Wireless InSite ensure a comprehensive device design process, from simulating the initial antenna pattern to computing throughput performance in a multipath channel model. Together the products ensure a device will work well in its intended environment.

Request Information
Remcom, Inc.
Featured Products And Services
Integrated RF Assemblies

Corry Micronics offers a new family of RF integrated assemblies designed to work across multiple frequencies in a variety of applications. These RF filter and amplifier modules feature several modulation types in a modular design structure.

Request Information
Corry Micronics, Inc.
dB-3205 Microwave Power Module

The dB-3205 is a microwave power module (MPM) operating in the frequency range of 43.5 to 45.5 GHz. This MPM is a power amplifier that provides 80-Watts CW RF output power. The RF signal path consists of a solid state amplifier and a vacuum power booster. The power supply topology uses proprietary low-noise, high-efficiency designs to operate the RF signal path. This compact, conduction-cooled MPM is designed to operate in extreme military environments.

Request Information
dB Control
EMI Filters And Capacitors

Knowles Capacitors’ excellence in ceramic materials technology, combined with EMI filter expertise, has enabled Knowles (Syfer brand) to offer an unequalled range of EMI filter products including surface-mount filters, panel-mount filters, planar arrays, discoidal multilayer capacitors, X2Y integrated passive components, and other filter types for hi-rel applications.

Request Information
Knowles Precision Devices DLI
0.5 To 18 GHz, 50-Ohm Directional Coupler: 50C-070-XX

The 50C-070-XX from JFW is a wideband directional coupler designed to operate from 500 MHz to 18 GHz and is rated for 50 Watts of RF input power.

Request Information
JFW Industries, Inc.
Thick Film Jumpers, Mounting Pads, And Kits

These glass-insulated, "0-Ohm", gold jumpers are ideally suited for providing interconnections and wiring crossovers in the fabrication of "chip and wire" type microelectronic modules. These jumpers allow for prototype and small quantity circuitry layouts without the need for special conductor patterns

Request Information
Mini-Systems, Inc.
Micro L- And S-Band Power Amplifier: NuPower LS5MI01

The NuPower LS5MI01 Micro L- and S-band power amplifier offers the smallest form factor of the NuPower family of PAs at 1.62 in3. This highly efficient solid state power amplifier provides over 5 watts of RF power across both L and S frequency bands.

Request Information
NuWaves Engineering
8-Channel A/D & D/A Zynq UltraScale+ RFSoC Processor PCIe: Model 7050

The Model 7050 from PENTEK is an 8-channel, high-performance PCIe board based on the Xilinx Zynq UltraScale+ RFSoC. With an on-board GPS receiver and 16 GB of DDR4 SDRAM, this device is ideal for high-bandwidth data streaming, waveform signal generators, multimode data acquisition, remote monitoring, and 5G development.

Request Information
Pentek, Inc.
0.1 To 6.0 GHz, Ultra-Low-Noise Amplifier: QPL9058

Qorvo offers the QPL9058 high-linearity, ultra-low-noise amplifier designed for use in many applications including 5G mMIMO, repeaters/DAS, LTE, TDD/FDD systems, and other general-purpose wireless applications. At 3.6 GHz, the amplifier typically provides 18 dB gain, +36 dBm OIP3 at a 55 mA bias setting, and 0.6 dB noise figure. The LNA can be biased from a single positive supply ranging from 3.3 to 5 volts.

Request Information
Digital Compact Receiver: R&S EM200

R&S delivers the R&S EM200 digital compact receiver for detecting, analyzing, and demodulating from 8 kHz to 8 GHz in a variety of applications including spectrum monitoring, spectrum measurements, interference hunting, and direction finding. This cost-efficient, optimized receiver and direction finder features a small form factor and allows for simple integration and use in just a few steps.

Request Information
Rohde & Schwarz GmbH & Co. KG
169 To 170 MHz Transmit/Receive Front-End Module: SKY66121-11

The SKY66121-11 is a 169 to 170 MHz transmit/receive (T/R) front-end module designed to provide a complete T/R train with T/R switches. Mounted in a 16-pin, 6 x 6 mm, multi-chip module (MCM), surface-mount technology package, this device provides a highly manufacturable low-cost solution for automated meter reading, advanced metering infrastructures, and ISM systems.

Request Information
Skyworks Solutions, Inc.
5GFlex 18 Cable Assemblies

Times Microwave Systems offers the 5GFlex 18 assemblies of dependable, flexible, outdoor-rated, general-use coaxial cables for many 5G applications, including telecom networks, satellite communications, and machine-to-machine controls.

Request Information
Times Microwave Systems
Antenna Tripod: ATU-514

A.H. Systems offers the ATU-514 “non-magnetic and non-reflective” antenna tripod designed especially for use in compliance testing.

Request Information
A.H. Systems
1000-Watts CW, 1.0 GHz To 2.5 GHz, Microwave Solid State Amplifier: 1000S1G2z5B

AR model 1000S1G2z5B is a solid state, air-cooled broadband amplifier ideally used for applications where instantaneous bandwidth, high gain, and linearity are required. When used with a sweep generator, the amplifier provides a minimum of 1000 Watts of RF power. It is designed to operate from 1.0 GHz to 2.5 GHz.

Request Information
Automatic Band-Switching RF Booster Amplifier For Tactical Radio: AR-20H

AR Modular RF offers the AR-20H portable, fully automatic band-switching RF booster amplifier with remote keyline for multiband VHF/UHF tactical radio equipment with legacy, proprietary, and emerging waveforms. Producing 20 Watts from a nominal 2 Watts CW/PEP radio input, the amplifier covers the frequency band of 30 to 512 MHz.

Request Information
AR Modular RF