Newsletter | February 23, 2021

02.23.21 -- EMI + Ceramic Feedthrough Filters | Optimizing Surface-Mount Filter Performance

 
Spotlight On Passive Components
An Essential Part Of The Wi-Fi Tri-Band System - 5.2 GHz RF Filters

As engineers, we’re always looking for the simplest solution to complex system design challenges. Look no further for solutions in the 5.2 GHz Wi-Fi realm. This article covers the resolutions to reduce design complexity while meeting those tough final product compliance requirements.

How To Analyze Passive Low Frequency Components With A Rohde & Schwarz Oscilloscope

This white paper presents a technique for easily and quickly analyzing low frequency response on an oscilloscope with the R&S®RTx-K36 frequency response analysis (Bode plot) option, which uses the oscilloscope’s built-in waveform generator to create stimulus signals ranging from 10 Hz to 25 MHz.

Best Practices For Maximizing The Performance Of Our Surface-Mount Filters

The Knowles Precision Devices DLI brand of microstrip bandpass filters offers innovative filter topologies yielding excellent performance in a small footprint when fabricated on high DK temp stable ceramic substrate materials.

Ceramic Feedthrough Filters: Winning The Finite EMI Fight

EMI is a serious concern for devices that are externally powered or require signal wires that extend outside the device. The wires that connect to power sources, or I/O points, can act as antennas that will allow EMI to be received and enter the device, causing it to perform improperly.

Resources
The Importance Of Filters In Point-To-Point Microwave Cellular Backhaul Networks

To satisfy backhaul demand and maintain high data rates without holes in coverage, wireless carriers are adding large numbers of micro and pico cells to fill in the gaps in conjunction with traditional macro cells. 

Consistent SATCOM Gain And Flatness Performance With The AR-50

The AR Modular RF Model AR-50 booster amplifier provides superior up and downlink performance for enhancing UHF satellite communications. Properly setting up the receive path will maximize the link quality and reliability.

Using Time To Save Time Tuning Filters

Tighter specs mean tighter dimensional requirements, more precision while tuning, and no room for error. All of these factors drive up cost and time. If we can save time by focusing on our tuning methods, we can lower costs and drive down lead times.

Most Popular News
Featured Multimedia
Webinar: WaveFarer Radar Analysis With Diffuse Scattering And Backscatter Through Walls
 

Learn about WaveFarer's new features for automotive and indoor radar applications, including diffuse scattering from rough surfaces such as roads and the ability to transmit through walls, windows, and more.  Remcom will demonstrate these and other new capabilities using a sample drive scenario as well as an indoor mmWave sensor scenario.

Bulletin Board
RF Interconnect Solution For Complex Antenna Installations
 

Airborne antennas must be mechanically secure in interference-free locations and in areas where signals can be optimally received. In this webinar, Times Microwave Systems will outline options to ease your installation and save you money on antennas, maintenance costs, and much more.

Featured Products And Services
Mini-SMT RSMT Series SMT Resistors

Mini-SMT thin film resistors offer maximum benefits in ohmic value ranges from .5 Ω through 500 MΩ. TCRs to ±5 ppm/°C - and absolute tolerances to 0.05%. Available in 0505, 0805, and 1206 sizes, these resistors provide proven thin film performance in a surface-mount solderable style.

Request Information
Mini-Systems, Inc.
C-Band Cavity Diplexer/Splitter Assembly: UFDX9999-002

MtronPTI offers the UFDX9999-002 C-band cavity diplexer/splitter assembly designed to support rugged, high-performance communication links that require full duplex operation in airborne, land, maritime, and deep space applications.

Request Information
MtronPTI
Fixed Attenuators: ATN3590 Series

Skyworks offers the ATN3590 series of fixed resistive attenuators designed as integrated circuits comprising thin film resistors and through-die vias that provide excellent attenuation flatness from low frequency to 40 GHz or higher. These attenuators are available from 0 to 30 dB and are ideal for use in level adjustment radios, radars, EW/EMC equipment, and test instruments.

Request Information
Skyworks Solutions, Inc.
2-IN-1 - Dual Use Connectorized Or Surface-Mount Limiter: LM-10M62G-20DBM-1W-24FF

The LM-10M62G-20DBM-1W-24FF is a dual use limiter passive designed for minimal insertion loss and operating in the 10 MHz to 62 GHz frequency range. This model is capable of handling an input power of 1 watt CW and 4 watts pulse peak with 1 µs PW, 1% duty cycle. The unit size is 0.53” X 0.7” X 0.26" and uses 2.4 mm female connectors that are removable for surface-mount use.

Request Information
Planar Monolithics Industries, Inc.
Passive Loop Antenna: SAS-563P

The SAS-563P is a 12” passive shielded loop antenna that is an excellent solution for shielding effectiveness testing. The electrostatic shielded loop antenna is typically used for shielding effectiveness testing per IEEE 299, MIL-STD 285, and NSA 65-6 as well as many other test standards. This passive loop antenna is shielded against the electric component by enclosing the conducting loop within an all-metal shield.

Request Information
A.H. Systems
0.7 To 6 GHz 16 Channel RF Distribution System: RFDS-16ch

AR offers the Model RFDS-16CH equipment package consisting of RF power amplifiers, an analog signal generator, a coupler, and power splitters providing 16 channels at more than 3W and up to 6 GHz. The equipment is housed in a 12U enclosure and the AC mains power distribution and control is provided along with all the necessary interconnect cables.

Request Information
AR