Newsletter | September 2, 2021

09.02.21 -- Beamformer | Oscilloscope | Biconical Antenna

 
Editor's Choice
X-Band Low Noise Block Converter: TLNB-7500AS

The TLNB-7500AS X-Band Low Noise Block Converter is specially designed for SATCOM applications. Utilizing state-of-the-art HEMT and GaAs FET technology, this block converter has been designed for both fixed and transportable applications.

Request Information
Communications & Power Industries
Readers' Choice
Dual-Polarized, Crossed Notch Antenna: Model 94800568
Cobham offers the Model 94800568 dual-linear, high-power, crossed notch antenna designed for applications operating over the 2 to 18 GHz frequency range. With a ratio of 9:1 bandwidth, this dual-polarized antenna features a maximum VSWR of 2.5:1 and <2.0:1 over 90 percent of the frequency range.
Request Information
Cobham
Featured Products And Services
TX/RX Dual-Polarization Beamformer(24 To 29.5 GHz): ADMV4828
The ADMV4828 is a silicon-on-insulator (SOI), 24.0 GHz to 29.5 GHz, millimeter-wave 5G beamformer. The RF integrated circuit (RFIC) is highly integrated and contains 16 independent transmit and receive channels. The ADMV4828 supports eight horizontal and eight vertical polarized antennas via independent RFV and RFH input/outputs.
Request Information
Analog Devices
80 Watts CW/PEP, 700 To 960 MHz Amplifier Platform: AR-5030C2 Series
This datasheet, for Model AR-5030C2, is an addendum to the datasheet for the standard amplifier Model AR-5030. The purpose of this datasheet is to document items specific to the AR-5030C2 — a custom configuration of the AR-5030.
Request Information
AR Modular RF
Integrated Stabilized RF Source: dB-9003, dB-9005

The dB-9003 and dB-9005 from dB Control are custom-mounted integrated stabilized RF sources (ISRFS) designed to operate in the I- and Ka-band frequency range. Both products feature high accuracy and a wide temperature operating range. They can be controlled and set up with a digital port. The units are packaged in a custom configuration with conduction cooling.

Request Information
dB Control
R&S RTO6 Oscilloscope

The R&S RTO6 is the oscilloscope you can trust. Engineered to deliver reliable results, it acts as a sophisticated laboratory companion to solve measurement problems fast and keep you on schedule. The R&S RTO6 oscilloscope series leverages the engineer’s expertise and builds your measurement confidence by achieving deep insights, whenever needed.

Request Information
Rohde & Schwarz GmbH & Co. KG
10 To 110 GHz Directional Coupler With 10 dB Coupling: Model 1100110010

KRYTAR offers the Model 1100110010 directional coupler operating in the 10 to 110 GHz frequency range and delivering exceptionally flat nominal coupling of 10 dB across the full bandwidth. Ideal for wireless designs and many test and measurement applications for emerging millimeter-wave and 5G markets, the coupler can be manufactured to meet military specifications.

Request Information
Krytar
NuPower: U-20-C01-S01

The NuPower U-20-C01 UHF solid state power amplifier offers broadband operation spanning across UHF frequencies and delivers 20 Watts, typical, of RF power across the frequency range of 225 MHz to 1.0 GHz.

Request Information
NuWaves Engineering
Folding, HighField Biconical Antenna SAS-544F

The SAS-544F folding biconical antenna was the first EMC antenna designed for portable compliance testing applications. This biconical antenna is designed with a coaxial wound balun for increased power capability and intended for both transmitting and receiving high electromagnetic RF fields. Additional features include a 20 MHz to 300 MHz frequency range, maximum continuous power up to 300 Watts, a 50 Ω impedance, and an included ABC-B mount.

Request Information
A.H. Systems
8 x 8 Non-Blocking Switch Matrix

Corry Micronics has developed an 8 x 8 non-blocking switch matrix that allows any of the eight inputs to be routed to any or all of the eight outputs.

Request Information
Corry Micronics, Inc.
Pulsed Klystron Amplifier: VA-87W

The VA-87W is a pulsed klystron amplifier designed for 1.3-megawatt peak power and operation within S-band (2.7 to 2.9 GHz) applications. This electromagnetically focused device features integral tunable cavities, waveguide output, coaxial input, and is forced air-cooled.

Request Information
Communications & Power Industries
100-Gigabit Ethernet Recorder For Pentek's Quartz RFSoC: Talon RTR 2757

The Talon RTR 2757 is a turnkey system designed for recording 200-Gigabit Ethernet UDP streams. It is designed to capture digitized data from four of these streams in real time at the full 100 Gigabit per second rate. With up to 122 TB of removable solid state storage, the RTR 2757 provides hours of multichannel wideband signal recording.

Request Information
Pentek, Inc.
3 To 1000 MHz, 75-Ohm Matrix Switch With 2 x 8 Blocking: 75MS-029

JFW offers the 75MS-029 75-Ohm blocking matrix switch that operates from 3 to 1000 MHz. This switch can be used to fan-out connections from a 2-port 75-Ohm network analyzer to allow for automated multi-port 75-Ohm testing.

Request Information
JFW Industries, Inc.
DC Thru 20 GHz Microwave Chip Resistor

MSI’s MSMW series is a thin film microwave chip resistor manufactured using specialized laser trimming for optimal performance over operating frequency ranges of DC to 20 Ghz. Standard case sizes start at 0201.

Visit us at IMAPS Booth 613.

Request Information
Mini-Systems, Inc.
Comprehensive EMC Test Software: emcware 6.0

The AR RF/Microwave Instrumentation emcware 6.0 is a comprehensive EMC test software for radiated susceptibility, conducted immunity, radiated emissions, and conducted emissions. The emcware provides automated electromagnetic compatibility (EMC) testing and report generation for all types of EMC test laboratories.

Request Information
AR
Antenna Simulation Software For Antenna Design And Analysis

Antenna technology is constantly advancing to meet the growing demands of industry. Likewise, Remcom has been keeping pace in order to provide engineers with antenna simulation software that matches their processes and helps them meet their device design requirements.

Request Information
Remcom
Enhanced 250Vac & 305Vac Capacitors

Knowles' latest enhanced range of safety-certified capacitors complies with international UL/cUL and IEC/EN specifications to offer designers the option of using a surface-mount ceramic multilayer capacitor to replace leaded film types.

Request Information
Knowles Precision Devices DLI
CATV Hybrid Amplifier: QPA9831

The QPA9831 is a hybrid push-pull amplifier module. The part employs GaAs MESFET, GaAs pHEMT, and GaN HEMT die and is operated from 45 MHz to 1218 MHz. It provides excellent linearity and superior return loss performance with low noise and optimal reliability.

Request Information
Qorvo
Sky5® Front-End Module For 4G And 5G Applications: SKY58277-11

Skyworks offers the SKY58277-11 Sky5 front-end module (FEM) for LTE and NR is a new addition to the Skyworks Sky5 portfolio of 5G technology products. The included 30-pad surface-mount (SMT) module consists of PA blocks; input and output ports matched to 50 ohm; a MIPI standard digital control block; single-ended filter, antenna, and Tx-Rx switches; and a low-noise amplifier (LNA).

Request Information
Skyworks Solutions, Inc.