Product/Service

320 To 400 MHz RF Power Amplifier

Source: AR Modular RF

KAW6042pic
5000 Watts CW, 320 To 400 MHz RF Power Amplifier. The Model KAW6042 is a Class AB wideband RF power amplifier system delivering in excess of 5000 Watts CW power into a 50-Ohm load at the frequency range of 370 MHz. Power gain is a minimum of 66 dB. GPIB control requires the optional IEEE488.2/RS232 Interface Controller Module
Request Information

Click Here To Download:
Datasheet: KAW6042: 5000 Watts CW, 320 To 400 MHz RF Power Amplifier

The Model KAW6042 is a Class AB wideband RF power amplifier system delivering in excess of 5000 Watts CW power into a 50-Ohm load at the frequency range of 370 MHz. Power gain is a minimum of 66 dB. GPIB control requires the optional IEEE488.2/RS232 Interface Controller Module.

The amplifier system features forward and reflected power indication on a front panel-mounted, analog meter; Automatic Level Control (ALC); RF gain control; overdrive protection; full VSWR protection; input blanking, and over-temperature protection. On the basic model these features, plus remote power on/off control, are accessible for hard-wire remote operation through a 25-pin, D-subminiature connector.

The amplifier system comprises eight Amplifier Units, a Power Controller Unit, two Combiner units and two Power Supply Units. These are installed on telescoping slides into a standard double, 19-inch equipment rack, 44 inches wide, 51 inches high, and 28 inches deep. The equipment rack is fitted with heavy-duty swivel casters. Each system component has integral forced-air cooling provided by highly reliable, impeller and/or tube-axial fans.

The Model KAW6042 amplifier uses switching-type power supply modules and operates from 208 VAC, 47-63 Hz line, 3 phase. Power consumption is 20 kVA. The system may be placed in 'stand-by' mode with the BLANKING switch, which greatly reduces energy consumption and heat generation.

Click Here To Download:
Datasheet: KAW6042: 5000 Watts CW, 320 To 400 MHz RF Power Amplifier

Need More Information? Just Ask.

Click the button below to directly contact the supplier. Use it to:

  • Ask a question.
  • Request more detailed information or literature.
  • Discuss your current project/application.
  • Request a quote.
  • Locate a distributor in your area.
  • Schedule a demo.
Request Information