INDUSTRY INSIGHTS
Manufacturers producing products containing oscillators must understand how to measure phase noise and reduce it if necessary. Failing to take phase noise measurements as a part of the quality control process can reduce the item’s performance and reliability. Phase noise occurs when the phase of an oscillator’s output signal in the frequency domain fluctuates. Why does that matter, and which phase-noise measurement techniques should people use?
LATEST HEADLINES
- Rohde & Schwarz And VIAVI Support European OTIC In Berlin For O-RAN Conformance Certification
- Keysight Introduces Next-Generation Radio Frequency Circuit Simulator For RFIC Chip Designers
- Kratos Demonstrates Fully Virtualized SATCOM Ground System For U.S. Army Futures Command Over SES’s O3b MEO Constellation
- Nex-Tech Wireless Partners With Ericsson To Keep Kansans Connected With Innovative Technologies
- Panasonic Introduces New mmWave Wi-Fi Solution Utilizing Peraso's X710 Chipset Technology
FEATURED SOLUTIONS
-
4.0 - 6.0 GHz, 1.0 KW Min Solid State High Power Amplifier: AMP4071P-1KW
The AMP4071P-1KW is a solid-state high-power pulse amplifier designed for applications requiring high peak pulse power in the 4.0 - 6.0 GHz frequency range.
-
6.0 - 18.0 GHz, 40 W Min Solid State High Power Amplifier: AMP2118
The AMP2118 Solid State High Power Amplifier operates within a frequency range of 6.0 to 18.0 GHz, delivering a minimum power output of 40 Watts at Psat.
-
20 - 100 MHz, 100 W Min Solid State High Power Amplifier: AMP2105-1
The AMP2105-1 Solid State High Power Amplifier operates within a frequency range of 20-100 MHz, delivering a minimum output of 100 Watts at Psat.
-
0.8 - 2.5 GHz, 300 W Min Solid State High Power Amplifier: AMP2025A
The AMP2025A is a solid-state high-power amplifier designed for a wide range of applications, featuring an operating frequency range of 0.8 - 2.5 GHz.
-
4.0 - 8.0 GHz, 20 W Min / 25 W Typ Solid State High Power Amplifier: AMP2050
The AMP2050 is a solid-state high-power amplifier designed for various applications. Operating at 4.0 - 8.0 GHz, it delivers a minimum of 20 Watts output power.
FEATURED VIDEOS
-
What Types Of Signals Have A High Crest Factor?
In this video, you will learn about the types of signals that have a high crest factor, commonly found in applications such as 5G networks that use advanced modulation schemes.
-
How Can High Crest Factor Signals Affect System Performance?
Discover how high crest factor signals can negatively impact the performance of RF and microwave systems with this short video.
-
What Is The Crest Factor Formula?
Learn the crest factor formula for RF & microwave in this video, including its unitless calculation and conversion to decibels.
FEATURED WEBINARS
-
Join this upcoming webinar to explore Wi-Fi 7 testing essentials and learn about a test solution based on the R&S®CMX radio communication tester.
-
Explore the future of XR technologies in 5G and 6G networks in this on-demand webinar. Delve into spectrum utilization, 3GPP standards, and traffic management complexities.
-
Dive into an overview of business-critical applications of private 5G networks and how passive and active network test solutions help verify network performance.
FROM THE EDITOR
RECENT NEWSLETTERS
- 04.24.24 -- 3D Propagation and Ray Tracing: Solutions for Tomorrow's Challenges
- 04.23.24 -- Power Electronics: Trends, Frontiers, And More
- 04.22.24 -- Unlocking Amplifier Efficiency: VSWR, Power Indication, and More
- 04.18.24 -- Oscillators 101 | Measuring The Phase Noise Of Crystal Oscillators | Overcoming Radar Simulation System Challenges
- 04.16.24 -- Telling Time On The Moon | Ray-Optical Modeling | RF Test Setup For Measuring Power & Harmonics