RF Test And Measurement Resource Center

TEST & MEASUREMENT APPLICATION NOTES AND WHITE PAPERS

How To Analyze Passive Low Frequency Components With A Rohde & Schwarz Oscilloscope
This white paper presents a technique for easily and quickly analyzing low frequency response on an oscilloscope with the R&S®RTx-K36 frequency response analysis (Bode plot) option, which uses the oscilloscope’s built-in waveform generator to create stimulus signals ranging from 10 Hz to 25 MHz.
Load Transient Response – Enhancing Loop Stability Testing
Ensuring stability in power supply design requires validating switching converter stability through frequency loop and load transient responses, aided by modern oscilloscopes for visualizing PWM signals and identifying converter effects.
Wi-Fi Performance In A House With Two Routers
Wireless InSite’s Communication System Analyzer provides capabilities for assessing the performance of LTE, WiMAX, 802.11n, and 802.11ac systems. This example investigates WiFi throughput coverage in a house provided by 802.11ac routers operating at 5 GHz using an 80 MHz bandwidth.
Simplify Coexistence And Interference Testing For GNSS Receivers
The R&S®SMW200A GNSS simulator offers an easy and convenient way to test your receiver design against a wide variety of potential interferers and jammers. Test cases extend from simple coexistence simulations to complex interference scenarios with localized emitters.
Mastering O-RAN Radio Unit (O-RU) Testing
How Kyrio found its perfect O-RAN conformance T&M solution from Rohde & Schwarz and VIAVI Solutions.

More Test & Measurement Application Notes and White Papers

TEST & MEASUREMENT SOLUTIONS

8-Channel A/D & D/A QuartzXM eXpress Module: Model 6003

Pentek offers the Quartz® Model 6003 high-performance Quartz eXpress Module (QuartzXM) based on the Xilinx Zynq UltraScale+ RFSoC FPGA. The RFSoC FPGA integrates eight RF-class A/D and D/A converters into the Zynq’s multiprocessor architecture, creating a multichannel data conversion and processing solution on a single chip.

TWT Amplifier: dB-3907

The dB-3907 TWT Amplifier (TWTA) is designed to use two wideband, periodic permanent magnet (PPM)-focused TWTs to amplify CW, AM, FM or pulse-modulated signals. The dB-3907 offers higher saturated output power and improved harmonic performance when compared to a single TWT approach.

DC-22 GHz Distributed Amplifier: CMD240C4

Qorvo offers the CMD240C4 wideband GaAs MMIC distributed amplifier housed in a leadless 4x4 mm surface mount package. The amplifier operates from DC to 22 GHz and is ideal for radar, space, satcom, test and measurement, and electronic warfare applications.

Capacitance Meter

Model HP 4268A is a capacitance meter designed for testing high value multilayer ceramic capacitor (MLCC) designs

Prove Field Worthiness Of EW Systems With RF Sources And Receivers

Radar simulation systems (i.e., RF sources and/or receivers) must perform to an exacting minimum standard if they are to accurately prove the field worthiness of EW systems.

TWT Amplifier: dB-3906

The dB-3906 TWT Amplifier (TWTA) is designed to use two wideband, periodic permanent magnet (PPM)-focused TWTs to amplify CW, AM, FM or pulse-modulated signals. The dB-3906 offers higher saturated output power and improved harmonic performance when compared to a single TWT approach.

Extended Frequency Spectrum Analyzer: EVO-RSA-6070A

The EVO-RSA-6070A is part of the EVO Series of extended frequency spectrum analyzers from Avcom designed for higher performance and agility in applications with continuously changing requirements. The included SDR-style technology analyzer includes a wide bandwidth receiver and employs FPGA, DSP, and high-performance processors.

1800 W, 65 V, 1.0 – 1.1 GHz Highest Power GaN Transistor On The Market: QPD1025L

Qorvo offers the 1800 W, 65 V, 1.0 – 1.1 GHz QPD1025L as the highest GaN transistor on the market. This discrete GaN on SiC HEMT has a package that features input pre-match resulting in ease of external board match and saved board space.

More Test & Measurement Solutions