Products and Services
RSS
R&S SMATE200A Vector Signal Generator
Rohde & Schwarz GmbH & Co. KG
The R&S SMATE200A is based on the successful R&S SMU200A but is specifically designed to meet production requirements. It comes without a display or keys on the front panel, and its connectors are located at the rear. In addition, it is optimized for faster setting times in order to reduce test time...
Click Here To Download:
•Product brochure: R&S SMATE200A Vector Signal Generator
•Application Note: PC Software For Generating FM/PM/AM Signals In The ARB
•Application Note: Importing Data In ARB, Custom Digital Modulation And RF List Mode
•Application Note: Speeding Up Production Test With The R&S SMATE200A
•Application Note: Remote Operation Of R&S Instruments Using Remote Desktop Connection Via LAN
The R&S SMATE200A is based on the successful R&S SMU200A but is specifically designed to meet production requirements. It comes without a display or keys on the front panel, and its connectors are located at the rear. In addition, it is optimized for faster setting times in order to reduce test time.
•Product brochure: R&S SMATE200A Vector Signal Generator
•Application Note: PC Software For Generating FM/PM/AM Signals In The ARB
•Application Note: Importing Data In ARB, Custom Digital Modulation And RF List Mode
•Application Note: Speeding Up Production Test With The R&S SMATE200A
•Application Note: Remote Operation Of R&S Instruments Using Remote Desktop Connection Via LAN
•Product brochure: R&S SMATE200A Vector Signal Generator
•Application Note: PC Software For Generating FM/PM/AM Signals In The ARB
•Application Note: Importing Data In ARB, Custom Digital Modulation And RF List Mode
•Application Note: Speeding Up Production Test With The R&S SMATE200A
•Application Note: Remote Operation Of R&S Instruments Using Remote Desktop Connection Via LAN
The R&S SMATE200A is based on the successful R&S SMU200A but is specifically designed to meet production requirements. It comes without a display or keys on the front panel, and its connectors are located at the rear. In addition, it is optimized for faster setting times in order to reduce test time.
Designed for production
- Very short setting times for frequency(< 2ms) and level (<2 ms or <4ms, frequency dependent)
- In List mode, setting time reduced down to <400 µs for frequency changes through use of predefined frequency and level values
- Flexibly addressable Fast Hop mode with setting times same as in List mode
- Multisegment waveform function enables fast switching between different test signals in baseband
- Electronic attenuator for entire frequency range
- Status LEDs on front, connectors on rear
Outstanding signal quality
- Very low SSB phase noise of typ. –135 dBc, or typ. –139 dBc with the Low Phase Noise option (20 kHz carrier offset, f = 1 GHz, 1 Hz measurement bandwidth) Wideband noise of typ. –153 dBc (>5 MHz carrier offset, f = 1 GHz, 1 Hz measurement bandwidth)
- High output power of +19 dBm (PEP), overrange +26 dBm with High-Power Output option
- Very high level repeatability of typ. 0.05 dB
- I/Q modulator with 200 MHz system bandwidth
- Excellent ACLR performance of typ. +70 dB with 3GPP FDD
Two signal generators in one
- Up to two complete independent signal generators in one unit
- Choice of 3 GHz and 6 GHz frequency options in both paths
- Up to two independent baseband sources that not only support realtime signal generation but also offer arbitrary waveform generation with up to 64 Msamples each
Connectivity
- Remote-controllable via LAN (Gigabit Ethernet) and GPIB
Click Here To Download:
•Product brochure: R&S SMATE200A Vector Signal Generator
•Application Note: PC Software For Generating FM/PM/AM Signals In The ARB
•Application Note: Importing Data In ARB, Custom Digital Modulation And RF List Mode
•Application Note: Speeding Up Production Test With The R&S SMATE200A
•Application Note: Remote Operation Of R&S Instruments Using Remote Desktop Connection Via LAN
