Products and Services
320 To 400 MHz RF Power Amplifier
•Datasheet: KAW6042: 5000 Watts CW, 320 To 400 MHz RF Power Amplifier
The Model KAW6042 is a Class AB wideband RF power amplifier system delivering in excess of 5000 Watts CW power into a 50-Ohm load at the frequency range of 370 MHz. Power gain is a minimum of 66 dB. GPIB control requires the optional IEEE488.2/RS232 Interface Controller Module.
The amplifier system features forward and reflected power indication on a front panel-mounted, analog meter; Automatic Level Control (ALC); RF gain control; overdrive protection; full VSWR protection; input blanking, and over-temperature protection. On the basic model these features, plus remote power on/off control, are accessible for hard-wire remote operation through a 25-pin, D-subminiature connector.
The amplifier system comprises eight Amplifier Units, a Power Controller Unit, two Combiner units and two Power Supply Units. These are installed on telescoping slides into a standard double, 19-inch equipment rack, 44 inches wide, 51 inches high, and 28 inches deep. The equipment rack is fitted with heavy-duty swivel casters. Each system component has integral forced-air cooling provided by highly reliable, impeller and/or tube-axial fans.
The Model KAW6042 amplifier uses switching-type power supply modules and operates from 208 VAC, 47-63 Hz line, 3 phase. Power consumption is 20 kVA. The system may be placed in 'stand-by' mode with the BLANKING switch, which greatly reduces energy consumption and heat generation.
Click Here To Download:
•Datasheet: KAW6042: 5000 Watts CW, 320 To 400 MHz RF Power Amplifier
- Ask a question.
- Request more detailed information or literature.
- Discuss your current project/application.
- Request a quote.
- Locate a distributor in your area.
- Schedule a demo.
