Download Library

First 1 2 3 4 5 344 (Last)

Titlesort Abstract Postedsort Sizesort
Application Note: Comparative Analysis: MEMS vs. Traditional Quartz Oscillators From simple RC oscillators, accurate to about 30,000 PPM, to atomic clocks with accuracies of greater than 0.001 PPB, there are clocking options to meet the needs of every application. By David Kenny, Manager Research and Development, Pletronics, Inc. & Robert Henry, Manager Quality Assurance, Pletronics, Inc. 03/19/2010 263.5 KB
Application Note: Ray Launching Geometrical Optics In FEKO For Scattering Analysis The analysis of the scattering properties of electrically large objects has always been a challenging problem. For highly accurate solutions to such problems the premier method is full-wave analysis with the MoM or MLFMM (as available in FEKO). By EM Software & Systems 03/19/2010 225.2 KB
Datasheet: 2 Pole High "Q" Air Cavity Folded Bandpass Filter This bandpass filter exhibits low loss and high skirt selectivity. Center frequency range is from 850 MHz to 950 MHz with a rejection of 6 dBc min @ +/- 2.5 MHz and 18 dBc min @ Fo +/- 5.0 MHz. 03/19/2010 1.52 MB
Datasheet: UMTS Band 4/CDMA AWS-1 Duplexer: ACMD-7609 The Avago ACMD-7609 is a highly miniaturized duplexer designed for use in UMTS Band 4 and CDMA AWS–1 (1710 – 1755 MHz UL, 2110 – 2155 MHz DL) handsets and mobile data terminals. 03/19/2010 466.6 KB
Datasheet: Fixed Attenuator Pads: ATN3590-00 The ATN3590 Fixed Attenuator Pads family of fixed resistive attenuators are integrated circuits comprising thin film resistors and through-die vias that provide excellent attenuation flatness from low frequency to 40 GHz or higher. 03/19/2010 314.8 KB
Datasheet: Class AB Solid-State RF Power Amplifier AR Modular RF has introduced a new Class AB solid-state power amplifier that delivers in excess of 250 Watts CW power into a 50-Ohm load over the frequency range of 1750 MHz to 1850 MHz. 03/19/2010 67.6 KB
Datasheet: UMTS Band 8 Duplexer: ACMD-7606 The Avago ACMD-7606 is a highly miniaturized duplexer designed for use in UMTS Band 8 (880 – 915 MHz UL, 925 – 960 MHz DL) handsets and mobile data terminals. 03/19/2010 481.4 KB
Datasheet: RF Mechanical Switch: DC - 3GHz MS-SMA-020 Narda, an L-3 Communications company, introduces the Model MS-SMA-020 SPDT fail-safe RF mechanical switch that operates from DC to 3 GHz and combines high performance with long-term reliability. This RF Switch is an excellent choice for automated test equipment, base station transmitters and receivers, and general-purpose applications as well. 03/19/2010 127.4 KB
Datasheet: UMTS/NCDMA/Co-Band GSM Rx Band 2 Duplexer: ACMD-7410 The Avago ACMD-7410 is a highly miniaturized duplexer designed for use in UMTS Band 2 (1850.48 – 1909.52 MHz UL, 1930.48 – 1989.52 MHz DL) handsets and mobile data terminals. 03/19/2010 23.5 KB
Datasheet: Quintplexer For PCS Blocks A-G/Cellular/S-GPS: ACFM-7104 The Avago Technologies’ ACFM-7104 is a miniature quintplexer that combines an extended frequency range PCS duplexer (Blocks A-G) with a Cellular duplexer and GPS filter. This device simplifies handset applications that are designed for simultaneous voice service and GPS positioning. 03/17/2010 636.5 KB
Datasheet: PCS (A-G) / UMTS Band 2 Tx Bandpass Filter: ACPF-7005 The Avago ACPF-7005 is a miniaturized Bandpass Filter designed for use in handsets and mobile data terminals operating in the PCS (Blocks A-G)/UMTS Band 2 Tx frequency range (1850.6 – 1914.4 MHz). 03/17/2010 1.08 MB
Datasheet: AVT-53663: DC – 6000 MHz InGaP HBT Gain Block

Avago Technologies’ new Broadband High Linearity InGaP HBT Gain Blocks: AVT-51663/AVT-53663 are economical, easy-to-use, general purpose InGaP HBT MMIC gain block amplifiers utilizing Darlington pair configuration housed in a 6-lead (SOT-363) surface mount plastic package.

The AVT-51663 and AVT-53663 are ideal devices for small-signal gain cascades or IF amplification.

03/17/2010 340.8 KB
Datasheet: AVT-51663: DC – 6000 MHz InGaP HBT Gain Block

Avago Technologies’ new Broadband High Linearity InGaP HBT Gain Blocks: AVT-51663/AVT-53663 are economical, easy-to-use, general purpose InGaP HBT MMIC gain block amplifiers utilizing Darlington pair configuration housed in a 6-lead (SOT-363) surface mount plastic package.

The AVT-51663 and AVT-53663 are ideal devices for small-signal gain cascades or IF amplification.

03/17/2010 330.5 KB
White Paper: Understanding Available Tools For RF System-In-Package And Multi-Chip-Module Design And Optimization RF system-in-package (SiP) and multi-chip-module (MCM) designs present engineers with the challenge of integrating complementary metal oxide semiconductor (CMOS) integrated circuits (ICs) for digital circuits and gallium arsenide (GaAs) or silicon germanium (SiGe) devices for RF and microwave circuits with soft-board laminates and low-temperature co-fi red ceramic (LTCC) packages. Software used to design these complex circuits must seamlessly bring together synthesis, simulation, and verification solutions via a single interface in order to ensure optimum component design and placement in each technology. It must also construct schematics and perform physical design entry for any technology in the SiP using uniform commands and menu options. 03/17/2010 947.0 KB
Datasheet: 1,500 Watt RF Power Transistor For UHF Pulsed Radar Microsemi Corporation recently introduced the new 1,500 watt RF power transistor for UHF pulsed radar applications, thus expanding its industry-leading portfolio of high power silicon carbide transistors. 03/17/2010 222.7 KB
Product Overview: Glass Microwave Integrated Circuit (GMIC) Glass Microwave Integrated Circuit (GMIC) is a novel circuit fabrication technology. It provides many advantages of GaAs MMICs whilst retaining the desirable performance characteristics of hybrid MICs. 03/17/2010 2.94 MB
Datasheet: SPDT Non-Reflective Miniature Switch TTL Compatible Driver, 0.5 - 18.0 GHz The MASWML0010 is a broadband (0.5 – 18GHz) SPDT Non-reflective switch featuring Low Insertion loss and Fast switching. The built-in, high-speed, TTL compatible driver, is driven by two independent control lines. The field replaceable connectors allow direct integration into microstrip applications. This proven harsh environment design is suitable for Airborne, Naval & Ground base applications. 03/17/2010 214.2 KB
Datasheet: SPDT Reflective Miniature SwitchTTL Compatible Driver, 0.5 - 18.0 GHz The MASWML0012 is a broadband (0.5 – 18GHz) SPDT reflective switch featuring Low Insertion loss and Fast switching. The built-in, high-speed, TTL compatible driver, is driven by two independent control lines. The field replaceable connectors allow direct integration into microstrip applications. This proven harsh environment design is suitable for Airborne, Naval & Ground base applications. 03/17/2010 216.5 KB
Datasheet: Ka-Band Active Limiter This Ka-Band waveguide limiter provides excellent protection from unwanted signals. It has low insertion loss to optimise system performance. 03/16/2010 219.9 KB
Datasheet: X-Band Waveguide Limiter with STC and Blanking This X Band waveguide limiter provides excellent protection from unwanted signals. It features STC and Blanking capabilities for additional system flexibility. 03/16/2010 271.8 KB
Datasheet: Ka-Band Active Waveguide Limiter This Ka-Band active waveguide limiter allows the system direct control over when the limiting function is applied. Built In Test Equipment (BITE) indicates a short circuit RF diode when blanking. 03/16/2010 647.3 KB
Datasheet: C-Band Waveguide Limiter This C-Band waveguide limiter provides excellent protection from unwanted signals. It features an SMA output connector for ease of system integration. 03/16/2010 431.5 KB
Datasheet: J-Band Waveguide Limiter This J-Band (12 - 18 GHz) waveguide limiter demonstrates Cobham Sensor Systems leading capability in producing waveguide limiter and receiver protector designs for Military and Commercial applications. This particular device is designed for narrow bandwidth Military operation, within the 12 - 18 Ghz frequency range. It features excellent insertion loss and high power handling. This performance is housed within a space-saving custom designed minimised outline package. This design capability can be applied to your particular Waveguide limiter requirements. of these ejectors as an alternative to pyrotechnic cartridges. 03/16/2010 228.1 KB
Datasheet: S-Band 'Drop-in' Limiter Module This high reliability S-band ‘Drop-in’ limiter module features a weight and space saving design. By utilising Cobham Sensor Systems GMIC (Glass Microwave Integrated Circuit) Technology, integration applications can benefit from both small feature size and high performance. This design has low insertion loss and high power handling capability, essential parameters for limiter applications. The same concepts can be applied to your particular integration needs. 03/16/2010 110.2 KB
Datasheet: X-Band Waveguide Limiter with STC, Blanking and Integrated Noise Source This X-Band waveguide limiter provides excellent protection from unwanted signals. It features STC and Blanking capabilities plus an integrated noise source for additional system flexibility. 03/16/2010 307.7 KB